Author |
Topic: Sunroof drains?? (Read 423 times) |
|
Pam and John
Junior Member
A pair of V6's
 
Posts: 52
|
 |
Sunroof drains??
« on: Dec 24th, 2004, 8:11pm » |
 Quote  Modify
|
Know its not the right time of year, but still checking car over after 2 days ownership. Sunroof was sticking a bit on opening, down to lack of use basically, seal cleaned and now working OK BUT noticed there was was water lying in surround and hinges on air deflector starting to rust. There appears to be drains from the surround at the the front, can anyone confirm where these come out as they seem to be blocked.
Thanks
John
|
|
 IP Logged |
|
|
|
Paul B
Senior Member
'98 24V Ultima saloon
Posts: 2442
|
|
Re: Sunroof drains??
« Reply #1 on: Dec 24th, 2004, 8:17pm » |
Quote Modify
|
Snoopy's your man for this. I know he cleans his regularly and will know for sure where they come out.
He mentions cleaning them here... Cleaning roof drain tubes
|
|
IP Logged |
Two hundred & seven horses and only one jockey!
|
|
|
Pam and John
Junior Member
A pair of V6's
Posts: 52
|
|
Re: Sunroof drains??
« Reply #2 on: Dec 24th, 2004, 8:22pm » |
Quote Modify
|
Brilliant, thanks, another job to put on list, going to busy if weather OK after xmas
Ta
John
|
|
IP Logged |
|
|
|
Pam and John
Junior Member
A pair of V6's
Posts: 52
|
|
Re: Sunroof drains??
« Reply #3 on: Dec 31st, 2004, 12:50am » |
Quote Modify
|
Ok, had a look at drains today and all seem clear. However, discovered seal on sunroof has ripped where the join is at the back, hence original sticking problem.
Next question is can they be replaced as the seal only, or will sunroof panel need replacing?
|
|
IP Logged |
|
|
|
Paul B
Senior Member
'98 24V Ultima saloon
Posts: 2442
|
|
Re: Sunroof drains??
« Reply #4 on: Dec 31st, 2004, 7:14am » |
Quote Modify
|
Hmm... mine's dodgy too. 
You could just replace the seal, but if you take it off (like I did) you will more than likely find that the metal on the roof panel is rusting (like I did) 
I managed to get a whole replacement panel but have yet to find the time & weather to tackle the job.
Not sure about anyone else, but it seems to me that the joint in the seal would be better at the front of the panel.
|
|
IP Logged |
Two hundred & seven horses and only one jockey!
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print