Author |
Topic: Auto Blower Adjusting Control a bit Iffy (Read 542 times) |
|
Ron
Newbie
I'm a YaBB newbie!
Posts: 0
|
 |
Auto Blower Adjusting Control a bit Iffy
« on: Dec 28th, 2004, 10:35pm » |
 Quote  Modify
|
Hi ya,
My automatic blower adjusting control on the dash seems to be very tempremental, one minute it's working then it goes off, also the passenger climate control LED has gone out, could this all be connected or are these two separate issues. Thanks, Ron
|
|
 IP Logged |
|
|
|
Paul B
Senior Member
'98 24V Ultima saloon
Posts: 2442
|
 |
Re: Auto Blower Adjusting Control a bit Iffy
« Reply #1 on: Dec 29th, 2004, 6:39am » |
Quote Modify
|
2 seperate issues I'd say Ron.
The procedure for changing the little bulb in the CC panel is outlined here... http://www.fordscorpio.co.uk/fasciabulbs.htm
|
|
IP Logged |
Two hundred & seven horses and only one jockey!
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: Auto Blower Adjusting Control a bit Iffy
« Reply #2 on: Dec 29th, 2004, 2:44pm » |
Quote Modify
|
In addition to what Paul states have a read of this it might just be the problem with the blower.....
http://www.fordscorpio.co.uk/hbctest.htm
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
Ron
Newbie
I'm a YaBB newbie!
Posts: 0
|
|
Re: Auto Blower Adjusting Control a bit Iffy
« Reply #3 on: Dec 29th, 2004, 4:04pm » |
Quote Modify
|
Cheers Paul B, and Snoopy for ya advice, I shall have a good read. 
Ron
|
|
IP Logged |
|
|
|
admin
Administrator
The Big Boss
Posts: 1410
|
|
Re: Auto Blower Adjusting Control a bit Iffy
« Reply #4 on: Dec 30th, 2004, 8:12am » |
Quote Modify
|
Do an interrogation of the fault codes first. http://www.fordscorpio.co.uk/ccreset.htm
the failing lcd passengers side is likely to be the ribbon connector on the rear of the cc control panel has come loose. That is if you mean no lcd display rather than just no illuminating bulb. the ribbon needs to be firmly seated and clips at both ends to be firmly secured. Dont prize out the cc panel itself, simply undo the fascia screws and pull the fascia out enough to get to the back of the cc panel to replace bulbs and check the ribbon connection. Full details are on the site.
Pete c
site founder
author cc pages
|
|
IP Logged |
|
|
|
Dave_h
Newbie
2.0 16v ultima tourmallard green
Posts: 6
|
|
Re: Auto Blower Adjusting Control a bit Iffy
« Reply #5 on: Jan 30th, 2005, 7:31pm » |
Quote Modify
|
just changed the instrument bulbs had the same problem with the control anyway.while it was out squirted switch with switch cleaner blow dry with comp air allow to dry also, working soooo much better
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print