Author |
Topic: control light not working (Read 412 times) |
|
webbo67
Newbie
I'm a YaBB newbie!
Posts: 15
|
 |
control light not working
« on: Feb 6th, 2005, 2:39pm » |
 Quote  Modify
|
Hello everyone.
This is my first post.
Just purchased a 1996 scorpio exec 24v. It came with the the red master key only. I have had another key cut and was going to programme it this afternoon. i have read how to do it in the handbook but the control light on the top of the dash does not illuminate. Any ideas on how i can either replace the light or programme the key another way.
Many thanks
Andy
|
|
 IP Logged |
|
|
|
SaveTheNight
Senior Member
I can resist anything ...except temptation !!
 
 
Posts: 1961
|
|
Re: control light not working
« Reply #1 on: Feb 6th, 2005, 2:43pm » |
Quote Modify
|
Hi Andy ...it's unusual for the PATS light not to illuminate ..but it's common that it drops down inside the dash .. it's worth checking under the red cowl to make sure it is in fact there ... welcome to the site too ... regards .....STN
ps. if it has dropped down then seek a little more advice before digging in there ok .. let us know
|
|
IP Logged |
|
|
|
webbo67
Newbie
I'm a YaBB newbie!
Posts: 15
|
|
Re: control light not working
« Reply #2 on: Feb 6th, 2005, 3:05pm » |
Quote Modify
|
Thanks Stn.
Been out and removed the cover and the light does infact work but it is very dim, when i replace the cover light cannot be seen. Any ideas? Also bulb in clock not working. how easy is it to replace?
Thanks
Andy
|
|
IP Logged |
|
|
|
SaveTheNight
Senior Member
I can resist anything ...except temptation !!
Posts: 1961
|
|
Re: control light not working
« Reply #3 on: Feb 6th, 2005, 3:47pm » |
Quote Modify
|
maybe a dim led Andy .. will it let you program though ? until you investigate further ? ..and the clcok bulb is slightly worse to replace than the other dash ones ...but ok with a bit of patience and care ..instructions should be on the site index .. ill look for you ok .. STN
|
|
IP Logged |
|
|
|
webbo67
Newbie
I'm a YaBB newbie!
Posts: 15
|
|
Re: control light not working
« Reply #5 on: Feb 6th, 2005, 5:34pm » |
Quote Modify
|
Just been and programmed the key.
Thanks for all your time and help STN.
Changing the bulb on the clock looks complicated though.
|
|
IP Logged |
|
|
|
SaveTheNight
Senior Member
I can resist anything ...except temptation !!
Posts: 1961
|
|
Re: control light not working
« Reply #6 on: Feb 6th, 2005, 5:39pm » |
Quote Modify
|
it isn't too bad Andy ... really ..glad you sorted the other ..... STN
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print