Author |
Topic: SEAT SWOP (Read 389 times) |
|
shaunskiman
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/speedy.gif) 24 valves of cosworth powered ultima ye ba ye ba
Posts: 77
|
Hi people, today I ve changed the seats in my cossie from velour to leather, But I have a little problem I have connected the six pin plug for the seat motors and they work, but I have a yellow lead with a two pin plug but no where on the leather seats to connect them too. the air bag warning light is also flashing 4 times telling me the pirotecnics on the pretentioners are not connected I am at a loss the plugs on the velour seats apart from the six pin are different. Any Ideas on how I can reconnect the explosive thingeys and what the yellow cable is for would be most welcoming. Cheers Shaun I.........
|
|
IP Logged |
|
|
|
low_tom
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://www.lowriderforums.com/forums/uploads/1103365307/gallery_102_12_1105199631.jpg)
mam the car goes up and down!
Posts: 167
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: SEAT SWOP
« Reply #1 on: Feb 21st, 2005, 6:43pm » |
Quote Modify
|
what colour were your seats shaunskiman?
|
|
IP Logged |
|
|
|
shaunskiman
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/speedy.gif) 24 valves of cosworth powered ultima ye ba ye ba
Posts: 77
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: SEAT SWOP
« Reply #2 on: Feb 21st, 2005, 8:28pm » |
Quote Modify
|
Hi Low_Tom, The Cloth seats are a slate grey colour and the leather seats are black Cheers Shaun I.....
|
|
IP Logged |
|
|
|
low_tom
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://www.lowriderforums.com/forums/uploads/1103365307/gallery_102_12_1105199631.jpg)
mam the car goes up and down!
Posts: 167
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: SEAT SWOP
« Reply #3 on: Feb 21st, 2005, 9:59pm » |
Quote Modify
|
thanks,i'm after pumice.
|
|
IP Logged |
|
|
|
raymond-turner
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm a YaBB newbie!
Posts: 2
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: SEAT SWOP
« Reply #4 on: Feb 22nd, 2005, 12:21am » |
Quote Modify
|
Exactly the same problem, come on guys, there must be a solution, just want to kill the flashing light. Cheers
|
|
IP Logged |
|
|
|
Snoopy
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/angryboy.gif) Very old.BAD tempered and missing friends.
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 6278
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: SEAT SWOP
« Reply #5 on: Feb 22nd, 2005, 7:56am » |
Quote Modify
|
I changed the seats in my scorpio and also fitted the heated seat harness and switches... From what I can remember ( Old age) I just connected the plugs as they are different sizes and clolours... , I think ,the pretensioner plug, as far as I can remember is YELLOW .. I did have to change the pretensioners as they had operated on the leathers and mine had not.. Will try and check later but its snowing heavens hard and I don't want to get frozen to death.......
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
daven
Guest
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
|
So when you changed the seats - did you leave the pretentioners in place? There are two types pyrotechnic and non-pyro! The non pyro ones have a long spring like cable that wraps around the seat cradle and has no electrical connection! It maybe that you will have to swop your old pretentioners back - just make sure you have disconnected the battery for half an hour! Daven
|
|
IP Logged |
|
|
|
|