Author |
Topic: front bumper removal (Read 372 times) |
|
craig
Guest
|
i know this topic was covered a few months ago somewhere on here,can i find it now  ,i think the answer is no..... 
anybody got the definitive knowledge about removing the front bumper
TIA
craig
|
|
 IP Logged |
|
|
|
SaveTheNight
Senior Member
I can resist anything ...except temptation !!
 
 
Posts: 1961
|
 |
Re: front bumper removal
« Reply #1 on: May 2nd, 2005, 4:36pm » |
 Quote  Modify
|
Craig .. first remove the wheel arch fixings .. should be two each side .. then the inner arch fixings < one in each arch < turn plastic plug through 90 degrees> ..then remove the headlamp side covers ..then the air intake hose .. then the bumper bolts .. et voila ! ........ regards ....... STN
|
|
IP Logged |
|
|
|
craig
Guest
|
sounds easy enough...
thanks...
|
|
IP Logged |
|
|
|
craig
Guest
|
HERE
is the thread i was looking for oiriginally,however glad i asked now,this didn't mention anything about the inner wing fixings.....
thanks again STN..
|
|
IP Logged |
|
|
|
Pete
Newbie
I'm a YaBB newbie!
Posts: 27
|
|
Re: front bumper removal
« Reply #4 on: May 5th, 2005, 9:38pm » |
Quote Modify
|
On my Scorp, the turny bits are for the rear bumper, the front has 2 screws either side on the inner arch, a bolt either side next to the headlamp, you will need to remove the intake arm on the R/H side and the headlamp covers and then a bolt either side in the front x member.
hth
Pete
|
|
IP Logged |
may you live for as long as you want
and never want for as long as you live
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print
Remove