Author |
Topic: Help with engine to gearbox bolts (Read 360 times) |
|
DJWerkz
Guest
|
Seems that the previous garage who worked on my car has lost some parts!
Can someone please provide details of which bolts to use to attach the BOB engine to auto gearbox? Also need bolts that fix torque converter to gearbox too?
Thanks Gang!
|
|
 IP Logged |
|
|
|
martin_rowe
Full Member
I love YaBB 1G - SP1!
Posts: 879
|
 |
Re: Help with engine to gearbox bolts
« Reply #1 on: Jul 12th, 2005, 4:51pm » |
 Quote  Modify
|
I may have a set of tc bolts in a convertersomewhere as for bell hsg bolts, main agent for the correct ones, unless some one is breaking at the moment, they are all m10 size of different lengths, but the heads are all 13mm, engineering cap screws/bolts of the right length would be a good subsitute, dont forget the 3 for the starter either.
|
|
IP Logged |
Rally Drivers Do It Sideways
|
|
|
DJWerkz
Guest
|
|
Re: Help with engine to gearbox bolts
« Reply #2 on: Jul 12th, 2005, 4:59pm » |
Quote Modify
 Remove
|
 ...thanks Martin, don't mind getting new bolts from main dealer, anyone provide FINIS numbers?
|
|
IP Logged |
|
|
|
DJWerkz
Guest
|
|
Help with Torque Converter bolts
« Reply #3 on: Jul 13th, 2005, 3:42pm » |
Quote Modify
Remove
|
OK, ordered the bolts for the bell housing to engine from Ford main dealer but they are uncertain which bolts I am refering to with regard to the torque converter!
In the Ford workshop manual in section 'A4LDE Automatic Transmission' on page 7 (of 19), drawing S1701022 is applicable to instruction 24 which reads: "Release the torque converter. Remove the four bolts".
These are the bolts I require, so can anyone help with identifying these with either FINIS or engineering numbers?
These bolts are accessed after removing the starter motor.
Thanks.
|
|
IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: Help with engine to gearbox bolts
« Reply #4 on: Jul 13th, 2005, 5:01pm » |
Quote Modify
|
Try this number with ford E 800152 S72 listed as they are lsited as M10x30mm if that helps
I think they are the ones refered to in your text!
If you have a look here http://www.fordscorpio.co.uk/a4lde.htm and tell me which diagram and number you are refering to then I can give you a definitive answer rather that 'guess'
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
DJWerkz
Guest
|
|
Re: Help with engine to gearbox bolts
« Reply #5 on: Jul 13th, 2005, 5:47pm » |
Quote Modify
Remove
|
Thanks Snoops, problem is, the links you referred me to are copies of those that appear on the Ford Microcat system and these do not clearly show the required bolts. Even my local Ford dealer had some choice words to say on how inadequate the diagram is in identifying the bolts.
The second drawing in your link shows two bolts that MIGHT be the correct ones, one is numbered 35 but even my Ford dealer would not state his reputation on them being the right ones!
|
|
IP Logged |
|
|
|
DJWerkz
Guest
|
|
Re: Help with engine to gearbox bolts
« Reply #6 on: Jul 14th, 2005, 4:30pm » |
Quote Modify
Remove
|
OK get this down boys!
The correct Ford part number for the 4 bolts that lock the torque converter is:
7103918
Any part numbers previosuly supplied by other members are not valid.
|
|
IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: Help with engine to gearbox bolts
« Reply #7 on: Jul 14th, 2005, 10:04pm » |
Quote Modify
|
Well we wern't looking in the right place really were we. When you look in the right place they are easy to find. BUT a big thanks something else learnt!
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print