Author |
Topic: help no go (Read 758 times) |
|
ricky
Full Member
I'm a YaBB newbie!
 
Posts: 165
|
is there anybody out there in essex who could do a scan on my 2.9, 12v that wont start, no spark. ive changed the ignition control module and it ran fine for 1 day then has just cut out again , ive tried a new module but no good ,im up the creek with no scorpio im in witham essex and ive only just got the car and im desperate to get it going as ive got to take my daughter back and forth to hospital , thanks 
|
|
 IP Logged |
"Two tonnes of electronic infested metal"...
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
 |
Re: help no go
« Reply #1 on: Jul 28th, 2005, 6:58pm » |
 Quote  Modify
|
Have you checked the coil and the leads that go to and from it?
if you have replaced the ignition module in the dizzy then there's not much else.
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
Paul_Boulden
Full Member
Bald Eagle
Posts: 134
|
|
Re: help no go
« Reply #2 on: Jul 30th, 2005, 12:31pm » |
Quote Modify
|
Hi Ricky,
I had a similar non-start problem with my 1996 12v. I replaced the ignition module which caused a temporary solution but it didn`t last so I replaced the coil which has sorted the problem.
I was getting weak sparks sometimes or no spark at all.
Paul Boulden
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print