Click to return to main site

Welcome, Guest. Please Login or Register.
Jul 22nd, 2024, 6:28pm


Balance: £16.65
Home Home Help Help Search Search Members Members Login Login
Ford Scorpio Forum« 2.0 16v Auto Box - Shift Solenoid No. 3 »
   Ford Scorpio Forum
   General
   Problems
(Moderators: admin, Highlander, scorpio_man, Baz, Simmo)
   2.0 16v Auto Box - Shift Solenoid No. 3
« Previous topic | Next topic »
Pages: 1  Reply Reply Send Topic Send Topic Print Print
   Author  Topic: 2.0 16v Auto Box - Shift Solenoid No. 3  (Read 339 times)
oz_scorpio
Newbie
*



I'm a YaBB newbie!

   
View Profile

Posts: 9
2.0 16v Auto Box - Shift Solenoid No. 3
« on: Oct 21st, 2005, 12:18pm »
Quote Quote Modify Modify

Still at it..
 
My '95 2.0 16v (78k miles) auto won't shift up to 4th.  No problem around town - a pain on the motorway (including fuel consumption!).
 
An OBD check gives the following message ->  
 
"P1761 Shift Solenoid No. 3 Performance"
 
I am also getting P0135, P0138 and P1131 O2 sensor codes - probably related to my slight manifold leak (I get an exhaust smell in the cabin on engine start).
 
For the auto problem, I suspect a sticking solenoid  - anything I can try other than a costly auto-box rebuild?  
 
I've bought a can of Wynn's Automatic Transmission Treatment product - worth a shot I guess.  
 
CS
 
IP Logged
scorpio_man
Administrator
*****




Ford Kuga awd

   
View Profile Email

Posts: 5654
Re: 2.0 16v Auto Box - Shift Solenoid No. 3
« Reply #1 on: Oct 21st, 2005, 2:20pm »
Quote Quote Modify Modify

hi there
 
i think the solenoid can be change on it's own, though i can't remeber where i saw that post.
have you cleaned the MAF?
 
hth
IP Logged
oz_scorpio
Newbie
*



I'm a YaBB newbie!

   
View Profile

Posts: 9
Re: 2.0 16v Auto Box - Shift Solenoid No. 3
« Reply #2 on: Oct 21st, 2005, 5:42pm »
Quote Quote Modify Modify

I checked and cleaned the MAF some months ago - clean as a whistle! - but no result.  The gearbox oil appears relatively clean and the box is normal in operation - except for the non-shift from 3rd to 4th..  
 
I've asked various mechanics and apprarently it's a major job (drain, sump off etc.) to get at the shift solenoids. At least that's what I've been told.  
 
I was hoping for an alternative to an autobox recon.
 
Thanks
 
CS
IP Logged
scorpio_man
Administrator
*****




Ford Kuga awd

   
View Profile Email

Posts: 5654
Re: 2.0 16v Auto Box - Shift Solenoid No. 3
« Reply #3 on: Oct 21st, 2005, 6:20pm »
Quote Quote Modify Modify

hi there
 
this is the post i was thinking about....
http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=OBD;action=displ ay;num=1100036439
IP Logged
oz_scorpio
Newbie
*



I'm a YaBB newbie!

   
View Profile

Posts: 9
Re: 2.0 16v Auto Box - Shift Solenoid No. 3
« Reply #4 on: Oct 22nd, 2005, 3:51am »
Quote Quote Modify Modify

Thanks Scorpio_man!  Smiley you must deserve a comendation for support! thanks  
 
I've read all the site material .. if the MAF doesn't fix it you're on you're own..
 
ah well, a recon auto is worth more than the car... and i'm not doing that.. but I hate to give up..perhaps I'll get lucky with a spanner - in other words I'll never see 4th gear again..  Cool  
 
Thanks for all the help Scorpio_man.  Cool
 
Now, where did I put that match?  
 
An Australian that should have known better...
IP Logged
Pages: 1  Reply Reply Send Topic Send Topic Print Print

« Previous topic | Next topic »

Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.