Author |
Topic: Cossie Ultima AutoBox No Gear Sellection (Read 321 times) |
|
Zirk
Newbie
I'm a YaBB newbie!
Posts: 2
|
 |
Cossie Ultima AutoBox No Gear Sellection
« on: Nov 6th, 2005, 7:14pm » |
 Quote  Modify
|
Hi Guys, first off Im a Newbie so be gentle but wot a great site keep it up!,
Ok hears my Problem, Ive got a N reg 2.9 24v Cos. which I took off the road about 6 months ago due to new job in London (couldn’t afford the Jungle Juice) Having want to get it back on the Road again I started preparing it, water, oil, tyre pressure etc, Jumped the Battery and to my surprise it started first time, run her for a while and to check weather the Brakes were seized selected drive moved forward about 1 foot and back again in reverse, no problems, being quite pleased with it all, I decided to Unhook the battery and treat it to a good Charge for a Day or two.
Ok, so Battery's back in fully charged, Start Her again, starts first time, Select Drive.... Nothing, No Thumbs, Clumps or anything, Tried Reverse, Nothing, Start moving the Selector Back, Forward, Park, Nothing, no Hint off doing anything.
The only thing I have noticed is the selector moves quite freely; although I haven’t driven the car for a while I do remember the Selector being quite stiff while driving.
Now Im starting to think that the Selector has come away, broke or popped off to the actual Gearbox or something, as it WILL Start in any Gear or Park and Neutral which tells me its stuck in Neutral as the car can be Pushed (after 3 Shredded Wheat’s).
Now, I may answered my own question here, But having read on your Site about Pringles, Maps, and all these wonderful electrical Problems (ie has taken the Battery out, done something) I thought I'd Ask you Guy's, before parting with my Cash getting it towed in to My Local Garage.
Any help or advice would be Great.
Thanks Chris.
|
|
 IP Logged |
|
|
|
howiedintheplace
Senior Member
Based near Evesham
Posts: 1194
|
 |
Re: Cossie Ultima AutoBox No Gear Sellection
« Reply #1 on: Nov 6th, 2005, 8:02pm » |
Quote Modify
|
I think you have an idea what it is 
It sounds like one of the clips has come off the linkage & the linkage has fell apart. Get a clip from Ford (very cheap) & get the car high enough so you can slide under & have a look. Make sure it's safe before you slide under 
You may have to remove the heat shields.
|
|
IP Logged |
Dave
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: Cossie Ultima AutoBox No Gear Sellection
« Reply #2 on: Nov 6th, 2005, 8:05pm » |
Quote Modify
|
The whole of the FORD workshop manual is on the main site have a read of this it might help http://www.fordscorpio.co.uk/autotrans.htm
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
nuttyscorp
Full Member
1998 (R) 2.3 ultima
Posts: 515
|
|
Re: Cossie Ultima AutoBox No Gear Sellection
« Reply #3 on: Nov 6th, 2005, 8:48pm » |
Quote Modify
|
yep, im thinking along the same lines as yourself and howdie....
dont part with silly money when you know what it most likely is, as howdie says, cheap and simple.......
Russ
|
|
IP Logged |
project car :- "84" mk2 granada 2.8i ghia X TURBO (rs 500 box)
|
|
|
Zirk
Newbie
I'm a YaBB newbie!
Posts: 2
|
|
Re: Cossie Ultima AutoBox No Gear Sellection
« Reply #4 on: Nov 6th, 2005, 9:17pm » |
Quote Modify
|
Hi All,
thanks for your replies and vote of confidence, I'll' get myself ramps and stuff and have a look and post the outcome.
Thanks Chris.
|
|
IP Logged |
|
|
|
mr._floppy
Junior Member
Posts: 100
|
|
Re: Cossie Ultima AutoBox No Gear Sellection
« Reply #5 on: Nov 7th, 2005, 12:29am » |
Quote Modify
|
You might be lucky and only need to remove the centre console to get at the faulty selector linkage.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print