Author |
Topic: FULL BEAM PPROBS (Read 298 times) |
|
ade
Newbie
from scorpio to ultima
Posts: 16
|
|
FULL BEAM PPROBS
« on: Nov 23rd, 2005, 5:52pm » |
Quote Modify
|
Hi have just bought a 2.0 16v ultima have a problem with full beam, relay is switchin fuses and bulbs ok no full beam, dash light is lighting up any ideas what to do now cheers ade
|
|
IP Logged |
|
|
|
howiedintheplace
Senior Member
Based near Evesham
Posts: 1194
|
|
Re: FULL BEAM PPROBS
« Reply #1 on: Nov 23rd, 2005, 6:48pm » |
Quote Modify
|
Have you changed the fuses? Sometimes a film builds up on the contacts & stops the current flow. Is the fuse box dry?
|
|
IP Logged |
Dave
|
|
|
Highlander
Moderator Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: FULL BEAM PPROBS
« Reply #2 on: Nov 23rd, 2005, 7:19pm » |
Quote Modify
|
Multiplug for the fusebox on properly? (Drivers side below windscreen under the bonnet) Has it been off? The locating pins have to be inserted under the holders at the end farthest from the cable before the plug is pushed in, it can look as if its ok but not be seated correctly, headlights are one of the things that dont work if its not on properly.
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
|