Author |
Topic: MOT failed (Read 288 times) |
|
locky
Newbie
I'm a YaBB newbie!
Posts: 8
|
Not on anything too bad though. O/S/R + N/S/R brakes binding and brake pipes are corroded Not being cluded up on brakes much, with the exception of changing pads & disks. Is there anything i can do to free up the calipers. could they just need cleaned? Getting the brakes pipes done next week, as i don't have the tools to do that. any advice welcome.
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: MOT failed
« Reply #1 on: Jan 14th, 2006, 4:24pm » |
Quote Modify
|
hi locky grease the slider pins and make sure you use the correct tool to screw in the piston. if you need a hand, give me a pm and we'll try and sort something out. hth
|
|
IP Logged |
|
|
|
mr._floppy
Junior Member
Posts: 100
|
|
Re: MOT failed
« Reply #2 on: Jan 14th, 2006, 8:02pm » |
Quote Modify
|
Worst scenario is corroded caliper pistons and bores ( that's why the two yearly fluid change is imperative ) you could clean and reinstall them them but even with new bore seals they will eventually leak, replacement calipers are expensive especially the rear units .
|
|
IP Logged |
|
|
|
locky
Newbie
I'm a YaBB newbie!
Posts: 8
|
|
Re: MOT failed
« Reply #3 on: Jan 14th, 2006, 9:42pm » |
Quote Modify
|
Ahh, that was what I was kinda thinking!!. I'm going to strip them down tomorrow and have a wee look. I changed the fluid about six months ago, and i've had a look through the rather large folder of service receipts but can't find one for the brake fluid ever being changed (strange, there's one for everthing else inc an autobox) oh well, if it need's them..... Kidney anyone??
|
|
IP Logged |
|
|
|
locky
Newbie
I'm a YaBB newbie!
Posts: 8
|
|
Re: MOT failed
« Reply #4 on: Jan 19th, 2006, 11:56pm » |
Quote Modify
|
All is well !! New brake pipes and 2 nice and shiney, brand new calipers fitted at the rear. Just for reference the Finnis Codes for the Calipers are 5021817 & 5021818.
|
|
IP Logged |
|
|
|
|