Author |
Topic: ABS Warning light (Read 805 times) |
|
Welshie
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/tigger.gif) Pepper Red P reg 2.3 Ultima
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 43
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
ABS Warning light
« on: Mar 5th, 2006, 2:55pm » |
Quote Modify
|
Car failed the dreaded MOT last Wednesday six things Rear numberplate light Front High beam inoperative lower ball joints both sides front and both flexie hoses And the dreaded ABS light staying on Well after a visit to Fords and £310 lighter i had sparkly new wishbones and flexies and even new roll bar rubbers and all went well changing them no real problems other than a little stiff bolts. Fixed the back number plate bulb but needed to get a high beam bulb. Tried then to find the problem with the ABS!! took all sensors off and cleaned followed the instructions on this site and still failed to find the fault feeling depressed and doomed to have again to pay through the nose to get this problem fixed on Monday Meanwhile after passing Halfords and buying a new bulb for my main beam i thought i would slip it on and one less problem would be fixed. after putting the bulb in and going to start the car, Hey Presto willy wonka the ABS light was going out on cue?? Thought hello and tried it several times still working. Thought maybe it doubled as a bulb failure warning light or something so i thought i would post it and with a little luck it willsave soemone else grief regards Welshie
|
|
IP Logged |
|
|
|
Simmo
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm an OAP !
Posts: 5508
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: ABS Warning light
« Reply #1 on: Mar 5th, 2006, 3:01pm » |
Quote Modify
|
Did you read this?.http://www.fordscorpio.co.uk/abslight.htm as it says that the connector in the engine bay can be a source of the problem. Could you have 'disturbed' it whilst fitting the new bulb?.
|
|
IP Logged |
Now I'm an OAP
|
|
|
allenjames
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://homepage.ntlworld.com/allenjames/biggayal.jpg)
New Scorpio Owner
Posts: 228
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: ABS Warning light
« Reply #2 on: Mar 5th, 2006, 6:00pm » |
Quote Modify
|
Just get it back to the MOT station pronto !
|
|
IP Logged |
1995, 2.0 Auto Scorpio Ultima Estate = R.I.P
|
|
|
Octavian_P
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i35.photobucket.com/albums/d190/Octavian_P/Avatare/Movie1.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 1126
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: ABS Warning light
« Reply #3 on: Mar 6th, 2006, 5:48pm » |
Quote Modify
|
Could someone post a picture with that dreded cable in the engine bay Cheers
|
|
IP Logged |
2.0 16V Ultima|2.3 16V Ghia|2.9 24V Cosworth Ghia
|
|
|
Octavian_P
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i35.photobucket.com/albums/d190/Octavian_P/Avatare/Movie1.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 1126
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: ABS Warning light
« Reply #5 on: Mar 7th, 2006, 4:46pm » |
Quote Modify
|
That picture i know, i thought there was another connector somewhere (on the other side of the car/pump). Anyway thanks. Could a reason be that my scoprio is left hand drive......
|
|
IP Logged |
2.0 16V Ultima|2.3 16V Ghia|2.9 24V Cosworth Ghia
|
|
|
|