Author |
Topic: Crack/Hole in front bumper (Read 409 times) |
|
ScorpioInDK
Junior Member
Happy owner of 2,9 12v
Posts: 56
|
 |
Crack/Hole in front bumper
« on: Mar 13th, 2006, 7:23pm » |
 Quote  Modify
|
I have a crack/hole in my front bumper. The diameter is about 2 cm. Close to the license plate.
I think that some poor driver with a towing hook - has been to near my car.. 
How do I fix the hole? There are some small cracks around it. Will Plastic Padding do the job?
Is it difficult to remove the front bumper ?
|
|
 IP Logged |
|
|
|
barrie
Full Member
24V The only way to fly
Posts: 179
|
|
Re: Crack/Hole in front bumper
« Reply #1 on: Mar 13th, 2006, 10:23pm » |
Quote Modify
|
first remove the wheel arch fixings .. should be two each side .. then the inner arch fixings one in each arch turn plastic plug through 90 degrees ..then remove the headlamp side covers ..then the air intake hose .. then the bumper bolts
To repair I would use a fiberglass filer with the metal type mesh at the back to reinforce it
|
|
IP Logged |
|
|
|
ScorpioInDK
Junior Member
Happy owner of 2,9 12v
Posts: 56
|
|
Re: Crack/Hole in front bumper
« Reply #2 on: Mar 16th, 2006, 10:56am » |
Quote Modify
|
Ok - thanks a lot .. I will do the job as soon as the weather in Denmark is warmer. d**n the winter has lasted too long..
|
|
IP Logged |
|
|
|
bootiful-scorpios
Full Member
ex 2.9 24v
Posts: 560
|
|
Re: Crack/Hole in front bumper
« Reply #3 on: Mar 16th, 2006, 6:14pm » |
Quote Modify
|
u can say that again , more snow on the way too
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print