Author |
Topic: gearbox (Read 333 times) |
|
fordcos
Full Member
all i want is for everything to work for once
Posts: 149
|
hi 1996 24v cosworth
i have a problem with the gearbox when in drive it goes from 1st to 3rd but not untill 5000 rpm wont change at all if the revs are kept low. will change if done manualy but seems to bang into gear no smoth change. any ideas.
|
|
 IP Logged |
where are all the good spares
|
|
|
sector-9
Senior Member
No scorpio anymore
Posts: 1069
|
 |
Re: gearbox
« Reply #1 on: Apr 25th, 2006, 11:48pm » |
 Quote  Modify
|
Low hydraulic pressure; possibly low fluid level, blocked filter or pressure regulator/pump fault (let's hope it's not the latter).
Darren
|
|
IP Logged |
|
|
|
fordcos
Full Member
all i want is for everything to work for once
Posts: 149
|
|
Re: gearbox
« Reply #2 on: Apr 26th, 2006, 11:25am » |
Quote Modify
|
thanks, but i feel i must have hydraulic pressure as you can change the gears manually. the part that's concerning me is on the obd2 i get fault code p0123 - high voltage to throttle position sensor from power control module, so i'm wondering if the fault is actually the power control module connected with the fact that on the obd2 i don't seem to be getting a maf reading. if anyone is able to shed any light on this i would be very grateful or anything else i should be testing?
|
|
IP Logged |
where are all the good spares
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print