Author |
Topic: H02 SENSOR (Read 346 times) |
|
paulscorp
Guest
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
|
Blithering ho2 sensor needed now. Found i had a cracked manifold so changed that and took the h02 sensor out gave it a wipe round and put it back. Now it runs like a bag of the preverbial sh**te - put it on the obd and found that the sensor is broken. FMD want £101 inc VAT!!!!!!! so now trying to find someone cheaper regards Paul
|
|
IP Logged |
|
|
|
paulscorp
Guest
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
|
I'll have a little look thanks regards Paul
|
|
IP Logged |
|
|
|
paulscorp
Guest
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
|
Well i put another sensor in yesterday and it has cleared the running too lean code, but still idles like a bucket of horse poo and no more fault codes (wierd) Anyways i thought i'd check to see if ihad any air leaks from busted rubber/metal pipework and lo and behold it seems that the EGR valve gasket (although new) is leaking and there is also a little breather pipe just below the exhaust manifold that attaches to the block that appears to be a problem. So 2 more things to rectify and hopefully cure my problems Hey ho, at least it passed the MOT yesterday
|
|
IP Logged |
|
|
|
Paul B
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://amethystsystems.homestead.com/files/PaulB_avatar_1.gif)
'98 24V Ultima saloon
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 2442
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: H02 SENSOR
« Reply #4 on: Apr 29th, 2006, 10:37am » |
Quote Modify
|
Paul... I've got an occasional "idling like a bucket of horse poo" problem too. I'm pretty certain thats something to do with an EGR tube. Noticed it was a bit too much of an easy fit when I put the engine back together. Must get that done sometime. BTW... where do you get your MOT done? Do they do them at work for you?
|
|
IP Logged |
Two hundred & seven horses and only one jockey!
|
|
|
paulscorp
Guest
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
|
Hi Paul, Sounds like you have a similar problem then, the proper FMD gaskets for EGR are only about £1.21 i think. But the little breatherpipe under the exhaust manifold is going to prove a little difficult i think, especially with my cumberland fingers. Work do do MOT's although they don't do them themselves, they use the Ashford MOT Centre at Cobbs Wood. I personally use Riverside Garage at Henwood and have done for the last 2 years as they are pretty good there. This time the bloke let me off with a split steering gaitor as long as i got it done and showed him, which i thought was nice of him as it saved me another £40 retest fee. Just hope i can get this idling sorted now regards Paul
|
|
IP Logged |
|
|
|
Paul B
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://amethystsystems.homestead.com/files/PaulB_avatar_1.gif)
'98 24V Ultima saloon
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 2442
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: H02 SENSOR
« Reply #6 on: Apr 29th, 2006, 2:34pm » |
Quote Modify
|
Oh yeah, I've used the guy over Cobbs Wood before. Phil Coast is his name. Gave him a quote for new windows a couple of years ago but he never had them done Have heard a few people recommend Riverside before, so I might go there. In the past I've taken it to Beaver Commercials. Thats mainly cos I've had the van tested there and just got to know theire style of testing.
|
|
IP Logged |
Two hundred & seven horses and only one jockey!
|
|
|
paulscorp
Guest
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
|
Yeah give them a try, they've always been ok with me. BTW are you going tomorrow to the meet? regards Paul
|
|
IP Logged |
|
|
|
Paul B
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://amethystsystems.homestead.com/files/PaulB_avatar_1.gif)
'98 24V Ultima saloon
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 2442
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: H02 SENSOR
« Reply #8 on: Apr 29th, 2006, 7:09pm » |
Quote Modify
|
'fraid not mate. Going to try and sort the car out tomorrow. Plus, the dog's a bit Tom & thingy at the moment and kinda needs looking after a bit.
|
|
IP Logged |
Two hundred & seven horses and only one jockey!
|
|
|
|