Author |
Topic: Replacing Lock Set (Read 302 times) |
|
Kenboy
Full Member
I'm a YaBB newbie!
Posts: 703
|
 |
Replacing Lock Set
« on: May 14th, 2006, 11:43am » |
 Quote  Modify
|
Hi I just aquired a lock set for my car and need to ask the following questions, what is the procedure for replacement and once the ignition barrel has been replaced how do I go about having the car programed to accomodate this change.
Regards Kenboy
|
|
 IP Logged |
|
|
|
Dave
Senior Member
Tourmallard 24v (ex-owner)
Posts: 1984
|
|
Re: Replacing Lock Set
« Reply #1 on: May 14th, 2006, 3:42pm » |
Quote Modify
|
Hi,
this link will be essential when replacing the locks:
http://www.fordscorpio.co.uk/doorlockrep.htm
What many folks do is drive the car to the Ford dealer then change the barrel when you are there. They can then program the red key to the car.
Hope this helps 
|
|
IP Logged |
Life after the Scorpio ain't easy..
|
|
|
Kjetil S
Senior Member
2001 BMW 520iat
Posts: 1419
|
|
Re: Replacing Lock Set
« Reply #2 on: May 14th, 2006, 3:51pm » |
Quote Modify
|
Or you can tape the old key to the steering column after you change the barrel, so you can get to the FMD 
|
|
IP Logged |
http://uncyclopedia.org/wiki/Norway
|
|
|
Kenboy
Full Member
I'm a YaBB newbie!
Posts: 703
|
|
Re: Replacing Lock Set
« Reply #3 on: May 14th, 2006, 5:03pm » |
Quote Modify
|
Many thanks for your replys, most helpful.
regards Kenboy
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print