Author |
Topic: engine vibration at 2000 rpm (Read 390 times) |
|
pedropedro
Full Member
Posts: 677
|
 |
engine vibration at 2000 rpm
« on: May 14th, 2006, 8:04pm » |
 Quote  Modify
|
I wonder if anyone can hlep me . I have a scorpio ultima and there is a bad resonance/vibration on the engine at exactly 2000 rpm . the car doesnt have to be moving...it is very bad the gearstick vibrates..under the bonnet the heat shield over the exhaust vibrates...I have removed that...it's the engine i suppose..what could cause that  ? any ideas would be appreciated
|
|
 IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: engine vibration at 2000 rpm
« Reply #1 on: May 14th, 2006, 8:05pm » |
Quote Modify
|
MIS fire on one of the plugs, What engine is it ?
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
pedropedro
Full Member
Posts: 677
|
|
Re: engine vibration at 2000 rpm
« Reply #2 on: May 14th, 2006, 8:09pm » |
Quote Modify
|
its a 2.3 litre 16v ...it just had head gasket changed following water pump failure
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: engine vibration at 2000 rpm
« Reply #3 on: May 14th, 2006, 9:09pm » |
Quote Modify
|
Engine mounts?
|
|
IP Logged |
|
|
|
Spannerdemon
Guest
|
|
Re: engine vibration at 2000 rpm
« Reply #4 on: May 14th, 2006, 9:18pm » |
Quote Modify
 Remove
|
Plug lead breaking down or wrongly connected?
Plug leads don't last forever.
|
|
IP Logged |
|
|
|
pedropedro
Full Member
Posts: 677
|
|
Re: engine vibration at 2000 rpm
« Reply #5 on: May 14th, 2006, 9:19pm » |
Quote Modify
|
Tks for the feedback .. i guess I need take it to a dealer
its a very specific vibration that disappears at 2100 rpm and 1900 rpm .....
|
|
IP Logged |
|
|
|
Spannerdemon
Guest
|
|
Re: engine vibration at 2000 rpm
« Reply #6 on: May 14th, 2006, 9:34pm » |
Quote Modify
Remove
|
If a garage replaced your Head Gasket, then I would take it back to them, as presumably the fault wasn't there before the Head gasket went ?
Ask them to check their work over for you in the hope that they will discover the fault.
Good luck with it.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print