Author |
Topic: ignition lock barrel - SOS!Stranded (Read 673 times) |
|
OHC
Junior Member
I love YaBB 1G - SP1!
Posts: 97
|
 |
ignition lock barrel - SOS!Stranded
« on: Jun 10th, 2006, 9:40pm » |
 Quote  Modify
|
Hello to all!
I can't turn the key in the ignition lock! Neither red key works! I left it overnight soaked in WD-40, see tomorrow if it helps.
Please, advise how i can remove the barrel without causing it and the car too much destruction. Please, write to my e-mail afanasiev77@mail.ru
I'm well aware this info is not for open forum!
I'm stranded so quick replies will be much apreciated.
My car is: 2.016V '95 VIN wfofxxgagfsd37482 I live and drive it in RUSSIA!
Please, Help!!!
OHC
|
|
 IP Logged |
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
 |
Re: ignition lock barrel - SOS!Stranded
« Reply #1 on: Jun 10th, 2006, 9:55pm » |
Quote Modify
|
Try the same key as you did yesterday & the day before
|
|
IP Logged |
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: ignition lock barrel - SOS!Stranded
« Reply #2 on: Jun 11th, 2006, 7:29am » |
Quote Modify
|
There is no secret .. brute force!!. However as Johnnycab says persevere with the normal key. Try turning and pulling/pushing at the same time. In order to remove the barrell properly you must get the key to turn to Position 1. IF you get it to turn to Position 1.... LEAVE IT THERE . Go to this page and select 'Ignition lock'.http://www.fordscorpio.co.uk/intbasicelec.htm.
|
|
IP Logged |
Now I'm an OAP
|
|
|
ady
Full Member
ford scorpio ultima 2.9i 1996 fast as ****
Posts: 148
|
|
Re: ignition lock barrel - SOS!Stranded
« Reply #3 on: Jun 11th, 2006, 5:02pm » |
Quote Modify
|
mine went like that last year 
in the end i had to buy a lock set from ford cost about £20
i had to put it together myself but that was ok just a little fiddley
hth
ady
|
|
IP Logged |
http://sonyps3giveaway.co.uk/index.php?referral=39
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: ignition lock barrel - SOS!Stranded
« Reply #4 on: Jun 11th, 2006, 5:05pm » |
Quote Modify
|
could the steering lock failing to come off also cause this?
|
|
IP Logged |
 
FDS2000 Scans - Birmingham
|
|
|
ady
Full Member
ford scorpio ultima 2.9i 1996 fast as ****
Posts: 148
|
|
Re: ignition lock barrel - SOS!Stranded
« Reply #5 on: Jun 11th, 2006, 5:57pm » |
Quote Modify
|
hrmm
i managed to ulock the steering lock
by removing the the cowling
and getting a small screwdriver and lifting the little metal clip that drops into the steering lock.
this gave me the chance to remove the ignition
hth
ady
|
|
IP Logged |
http://sonyps3giveaway.co.uk/index.php?referral=39
|
|
|
petra
Newbie
I'm a YaBB newbie!
Posts: 2
|
|
Re: ignition lock barrel - SOS!Stranded
« Reply #6 on: Jun 12th, 2006, 10:17am » |
Quote Modify
|
steering lock won,t come on any sugestions?
|
|
IP Logged |
|
|
|
petra
Newbie
I'm a YaBB newbie!
Posts: 2
|
|
Re: ignition lock barrel - SOS!Stranded
« Reply #7 on: Jun 12th, 2006, 10:17am » |
Quote Modify
|
|
|
IP Logged |
|
|
|
albert
Newbie
I'm a YaBB newbie!
Posts: 8
|
|
Re: ignition lock barrel - SOS!Stranded
« Reply #9 on: Jun 12th, 2006, 6:59pm » |
Quote Modify
|
What you do is that you take a 7 mm drill into the ign lock barrel, than a 11 mm drill and drill about 15mm into the barrel. Than you can get out the parts inside adn take a screwdriver to turn the lock around. Then you take out the cylinder and replace it with a new one 
|
|
IP Logged |
|
|
|
OHC
Junior Member
I love YaBB 1G - SP1!
Posts: 97
|
|
Re: ignition lock barrel - SOS!Stranded
« Reply #10 on: Jun 13th, 2006, 1:05pm » |
Quote Modify
|
Hello!
Thanks to all for advice. I managed to remove the barrel without damage. I dismantled the cowling, removed the ignition contacts - black plastic thing with wires soldered to it (but be careful with its plastic clips!) Then I tried to turn the Key pushing it inwards. An bingo - it turned freely. I tried to repeat the trick with contacts on but to no avail. Without them there is some slack in the shaft coming out from the barrel - and that helped me! The rest is history! 
Truly yours,
OHC
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: ignition lock barrel - SOS!Stranded
« Reply #11 on: Jun 13th, 2006, 1:17pm » |
Quote Modify
|
barrel rebuild? or just a new one?
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
OHC
Junior Member
I love YaBB 1G - SP1!
Posts: 97
|
|
Re: ignition lock barrel - SOS!Stranded
« Reply #12 on: Jun 13th, 2006, 2:28pm » |
Quote Modify
|
Hello!
FMDs in Russia sell them only in sets (ignition, two doors and boot) and 2 weeks' wait. And door and boot locks still work OK! I've rebuilt it and cut a new key!
OHC
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print