Author |
Topic: Ignition Barrel (Read 337 times) |
|
FishHead
Newbie
I'm a YaBB newbie!
Posts: 11
|
|
Ignition Barrel
« on: Jun 16th, 2006, 10:42am » |
Quote Modify
|
I've just fitted a new ignition barrel using the splendid instructions at http://www.fordscorpio.co.uk/ignitionlock.htm Many thanks! I have a few (hopefully) constructive comments which hopefully can be incorporated into the instructions: A reciprocal link to http://www.fordscorpio.co.uk/doorlockbld.htm would be useful. Under "Ignition lock removal" it says "Very straightforward. " - I think this should be changed to "neigh on impossible without removing the PATS unit - there is a phillips screw underneath" Sadly, I didn't heed paragraph one and mine got to the stage where it wouldn't turn at all - Mr AA took off the lower shroud and unhooked the plastic bit that the ignition unit connected to - this meant I had to turn the key to unlock the steering and pass the PATS and then use a small key to turn the ignition on. Also - the upper shroud comes off more easily if you lower the steering wheel. The steering lock must be off to slip the new barrel back in - this wasn't an issue for Simon C as he'd turned key to position 1 to remove barrel - but I'd been driving mine. This was actually the most frustrating bit - possibly because the England game had just kicked off. That'll do - thanks again to Simon C. Fish
|
|
IP Logged |
|
|
|
|