Author |
Topic: Oil Lamp on and Rattle (Read 343 times) |
|
macw
Newbie
I'm a YaBB newbie!
Posts: 46
|
 |
Oil Lamp on and Rattle
« on: Jun 23rd, 2006, 12:11pm » |
 Quote  Modify
|
At the end of a short journey (1 mile) the oil light flashed on just before I parked. The next morning I checked the Oil and if anything it was high (Service Nov 2005). On starting the car the light oil lamp was on and there was a medium pitch rattle from the engine (only noticeable with the bonnet up. The car has 169K (FSH) and I am told it might be the oil pump but also it's probably not worth changing. I am told it has a chain drive and the chain may have gone, though I thought it was driven by a rod, must check my manual. Any comments appreciated.
|
|
 IP Logged |
|
|
|
PeteB
Full Member
2.0 16v Ultima Saloon RIP \ 2.5 TD Ultima Saloon
Posts: 229
|
|
Re: Oil Lamp on and Rattle
« Reply #1 on: Jun 23rd, 2006, 12:13pm » |
Quote Modify
|
Which engine is it?
Pete
|
|
IP Logged |
|
|
|
sector-9
Senior Member
No scorpio anymore
Posts: 1069
|
|
Re: Oil Lamp on and Rattle
« Reply #2 on: Jun 23rd, 2006, 6:17pm » |
Quote Modify
|
If it's the DOHC then the oil pump is driven by a short chain from crankshaft. Not sure about the V6 but IIRC the 2.8 was driven from the camshaft via a skew gear which also drove the distributor - this doesn't apply to the Cossie though and possibly not the V6 12V either...
Darren
|
|
IP Logged |
|
|
|
howiedintheplace
Senior Member
Based near Evesham
Posts: 1194
|
|
Re: Oil Lamp on and Rattle
« Reply #3 on: Jun 24th, 2006, 6:11am » |
Quote Modify
|
Well don't know what engine but from the description I would guess a 24V.
Gets it's oil pump drive from the front timming chains which could explain the noise & sometimes fails.
But it's only a guess, what engine?
|
|
IP Logged |
Dave
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print