Author |
Topic: Valve body for Autobox. (Read 265 times) |
|
dinodelta
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm a YaBB newbie!
Posts: 3
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Valve body for Autobox.
« on: Jul 28th, 2006, 10:18am » |
Quote Modify
|
I am looking for a new replacement valve body for my 2.0 16v autobox. I have found several for the 4R44E box in America and they are priced at around £40-60 but the part codes don't match up with Ford UKs part numbers. Went to my local Ford dealer and the price for the valva body in the UK is a glorious £640! Anyone know a knowledgable autobox repairer or someone who has used the sleave kits available to reseat the drive solenoids?
|
|
IP Logged |
|
|
|
Geoff_W
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i103.photobucket.com/albums/m140/Geoff_W/Harewood200542meaningoflife.jpg)
98 Ulti2.5tdi Auto
Posts: 1340
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Valve body for Autobox.
« Reply #1 on: Jul 28th, 2006, 10:54am » |
Quote Modify
|
Morning and welcome. Whereabouts are you, there is a listing on the site with some suggestions, scroll down to Transmissions on this page. http://www.fordscorpio.co.uk/dealers.htm. I dont know if anybody over here has experience of the 4R44E box which I believe superceded the A4LD box in the states. On yours, you have an A4LDE with electronic overdrives, I suspect the E in 4R44 is for electronic, but I don't know if they are interchangeable. I personally have used John Lugo transmissions in Manchester for previous auto work on a mk3 A4LD and found them to be very helpful. Their web address is: http://www.automatictransmissions.co.uk/index.htm Good luck Geoff
|
|
IP Logged |
The winding road goes on and on... or at least it does in Northumberland
|
|
|
sector-9
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/dilbert.gif) No scorpio anymore
Posts: 1069
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Valve body for Autobox.
« Reply #2 on: Jul 29th, 2006, 9:34pm » |
Quote Modify
|
Do the solenoids definitely not come off the valve block? I'd be very suprised if they didn't and if they do then take a few from a scrap 'box. Or did you mean the servo pistons...? Darren
|
|
IP Logged |
|
|
|
|