Author |
Topic: No Heat (Read 483 times) |
|
gadger604
Newbie
I'm a YaBB newbie!
Posts: 5
|
Hello all. just bought myself a 2.5td ultima estate 95 on a 'N' plate.
i have a problem with the 'CC' i am getting no heat. the engine is reaching normal temp as expected and the aircon works great (just had it re-gassed)
i cant tell if the heater matrix has been by-passed or if there is some simple reason why im not getting hot air through the vents.
ive looked at all the really usfull pages on the froum loads about the 'ac 'cc system but no fault finding stuff on the heater.
any help would be apreciated
Regards
Gary 
|
|
 IP Logged |
|
|
|
craig
Guest
|
have you tried doing a re-set on the system ?
all the details are HERE
|
|
IP Logged |
|
|
|
gadger604
Newbie
I'm a YaBB newbie!
Posts: 5
|
 |
Re: No Heat
« Reply #2 on: Jul 31st, 2006, 8:24pm » |
 Quote  Modify
|
Thanks for the reply
i have done a full reset as per the instructions and it shows no fault codes on the passenger side LCD
regards
Gary
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: No Heat
« Reply #3 on: Jul 31st, 2006, 11:56pm » |
Quote Modify
|
Heater matrix could be blocked.
To check it, warm up the engine & then feel the matrix inlet & outlet pipes. If the inlet pipe is hot & the outlet pipe is cold then the matrix is blocked. 
|
|
IP Logged |
|
|
|
gadger604
Newbie
I'm a YaBB newbie!
Posts: 5
|
|
Re: No Heat
« Reply #4 on: Aug 1st, 2006, 8:20pm » |
Quote Modify
|
Will give that a go cheers
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print
Remove