Author |
Topic: 1995 24V Cosworth Battery side Fusebox Removal? (Read 369 times) |
|
davem
Full Member
A member since August 2000
 
Posts: 135
|
 |
1995 24V Cosworth Battery side Fusebox Removal?
« on: Sep 6th, 2006, 6:17pm » |
 Quote  Modify
|
I have a problem with the electric cooler fans, which I have narrowed down to a problem with the battery side fuse box.
Fuse 44 should supply +12v to pin 3 of the fan relay, but in my case it supplies about 6 volts (sometimes nothing at all) to the Fan relay, and wiggling (technical term) the fuse box a bit shows an intermetant connection.
I have temporarily wired +12V to pin 3 of the Fan relay and this works just fine. Both fans now operate as expected in both half and full speed modes.
My question is, How do I remove the battery side fuse box? I can see 2 bolts at the front, and I have removed them. The front then lifts up, but the back is obvioulsy connected by the wiring loom. Is there a multi-plug somewhere or a clip or something?
Many thanks
Dave
|
|
 IP Logged |
'95 Cosworth - 185,000 miles and still going
|
|
|
solarpanel
Full Member
I love YaBB 1G - SP1!
Posts: 551
|
|
Re: 1995 24V Cosworth Battery side Fusebox Removal
« Reply #1 on: Sep 6th, 2006, 7:07pm » |
Quote Modify
|
if i remember right you take the lid off the middle section you unclip and the fuses etc lift up you can pull the multiplugs off then from the underside the bottom stays put...hth
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print