Author |
Topic: Heater Matrix Hose (Read 334 times) |
|
Glut4pun
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) On my 3rd. Correction, now fourth.
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 13
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Heater Matrix Hose
« on: Dec 12th, 2006, 6:27pm » |
Quote Modify
|
Hi all. There is a small hose that is attached to the engine nr the exhaust and to a long hose that attaches to the heater matrix. My small hose is corroded and a new one costs over £30 from Ford. The long hose from the matrix is long enough to reach the engine, making the small hose redundant. Does this seem like a good idea? Will it fit? No jokes about my small hose please!!! Cheers. Oops should have told you the engine size is 2.3
|
|
IP Logged |
|
|
|
Highlander
Moderator Expert
![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif)
![](http://i1001.photobucket.com/albums/af132/CharlieSloan/Flags/Scotland.gif)
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 8244
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Heater Matrix Hose
« Reply #1 on: Dec 12th, 2006, 11:10pm » |
Quote Modify
|
Do you mean shortening the hose?? If you PM me your address I have good used 2.3 matrix hoses I can send you
|
|
IP Logged |
![](http://i8.tinypic.com/2qvxssl.gif)
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
Jonnycab
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i70.photobucket.com/albums/i101/jonnycab/JP_nitrous.gif)
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Heater Matrix Hose
« Reply #2 on: Dec 13th, 2006, 12:30am » |
Quote Modify
|
Do you mean the bit with the aluminium heat shield around it ? The main hose may reach, but I seem to remember that the bore is too big, so you still need the short smaller bore pipe. If you have a good local motor shop (not Halfords), then they might have a piece of pipe with the same bore, or at least be able to order some of it. Shouldn't be more than 10 quid a metre I would have thought
|
|
IP Logged |
|
|
|
|