Author |
Topic: climate control (Read 314 times) |
|
TIPPER
Newbie
I'm a YaBB newbie!
Posts: 15
|
 |
climate control
« on: Dec 26th, 2006, 8:08pm » |
 Quote  Modify
|
can someone tell me why my climate control only blows cold ? just replace gearbox loom and got engine to idle about right ! engine runing temp is about right but climate control will not get HOT!!!!!!!!!!
|
|
 IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: climate control
« Reply #1 on: Dec 26th, 2006, 8:15pm » |
Quote Modify
|
hi there
try a reset on it.
hth
|
|
IP Logged |
|
|
|
TIPPER
Newbie
I'm a YaBB newbie!
Posts: 15
|
|
Re: climate control
« Reply #2 on: Dec 27th, 2006, 3:35pm » |
Quote Modify
|
tryed the reset and still blowing cold , the only code that came up was 52 ? rewent through the system again andcame up with no fault codes 00
so what is code 52? what can i do to make this thing blow hot ?
thanks for anybody's help
|
|
IP Logged |
|
|
|
Tony_Bradley
Junior Member
Cossies - Rapid Road Transport
Posts: 59
|
|
Re: climate control
« Reply #3 on: Dec 27th, 2006, 4:31pm » |
Quote Modify
|
Hi Tipper
Are you sure there are no air locks and the Heater matrix is full of water...
Tou may have to ask other memebers how to ensure that the matrix is full.
I've seen posts about running with the expansion bottle cap off for a while, Jacking up the front of the car,
etc...
Best get an expert to make a recommendation.....
Hope you're warm soon
Tony
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: climate control
« Reply #4 on: Dec 27th, 2006, 11:40pm » |
Quote Modify
|
Hi Tipper,
Run the engine until it's warmed up & then turn the heater blower on full.
Then check the matrix outlet pipe....if it's cold or starts going cold then the matrix is blocked or restricted.
It seems to be a common problem lately 
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print