Author |
Topic: Rear drive shaft (Read 304 times) |
|
richa
Newbie
I'm a YaBB newbie!
Posts: 17
|
 |
Rear drive shaft
« on: Feb 13th, 2007, 5:11pm » |
 Quote  Modify
|
Hi, I have today heard a knocking sound from the rear offside wheel. Will check the wheel itself and bearing but i think its the driveshaft breaking up. Noise is much worse when i reverse. Has anybody had any experience of this and what sort of job is involved. Should I still drive the car or get on with it quick as it may fail altogether. I think I will need to change the drive shaft as a whole unit.
Best wishes
Richa
|
|
 IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Rear drive shaft
« Reply #1 on: Feb 13th, 2007, 8:03pm » |
Quote Modify
|
The cv joint can be replaced seperately.
Better to have a look before buying anything though
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
richa
Newbie
I'm a YaBB newbie!
Posts: 17
|
|
Re: Rear drive shaft
« Reply #2 on: Feb 16th, 2007, 3:54pm » |
Quote Modify
|
Thank you Highlander for the reply. I had a look at the car and sure enough the outer gaiter has perished so I will get on with changing the CV joint as a whole.
Strangely the chinking sound has disappeared but probably not for long. Without doubt if a gaiter looks in poor condition it needs changing straight away. Does anybody know if you should change the driveshaft bolts or just replace the old ones.
Regards Richa
|
|
IP Logged |
|
|
|
davidberryman
Newbie
I'm a YaBB newbie!
Posts: 32
|
|
Re: Rear drive shaft
« Reply #3 on: Feb 16th, 2007, 3:59pm » |
Quote Modify
|
just replaced cv gaitors on mine, ford recommend replacing bolts as they stretch on torquing up, 0.60p each.
good luck
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print