Author |
Topic: 2.3 DOHC installation on halt - sorted (Read 4425 times) |
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/laugh.gif) |
2.3 DOHC installation on halt - sorted
« on: Jul 29th, 2007, 3:58pm » |
Quote Modify
|
Hi there! My engine dowgrade from 24v to 16v is in its final stages now. The new engine is in place and I made a new exhaust pipe with a cat etc. Will write a full report with a pile of photos one day. I haven't seen or worked with a 2.3 DOHC Scorps before... Well I have peeked under the bonnet of one, but never actually taken a closer look. So I have a few questions: 1. The coolant hoses need to be sorted. Some of them are quite obvious like the one that goes to the upper radiator hole and the one that goes down, but, but... Is the heater matrix lower hose connected to: http://www.issikka.net/make/images/engswp/egr_and_waterpump.jpg the small circled pipe in the picture? 2. Where are the hoses from the EGR (in the same pic) connected? 3. In the picture: http://www.issikka.net/make/images/engswp/empty_water_hole_and_a_multipl ug.jpg What is the meaning of that waterhole I've circled in the picture and what is this multiplug for (also circled) 4. Vacuum pipes for the DOHC 2.3 ? sigh! I've tried finding information from the site, but in vain. Could someone throw me some pictures of the 2.3DOHC vacuuming Much, much appreciated. There are a few pipes on top of the inlet manifold, one is for the break booster, that's ok, one goes down to the fuel fumes recirculator (or whatever it is called) but then there's these two lonely black pipes standing up and waiting for some hoses. Your help is much appreciated, the project is waiting for these little pieces and some minor adjustments. Then it's time to try to fire up the beast Thanks in advance!
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
Kjetil S
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i44.photobucket.com/albums/f41/kskjon/scorpio/avatars/DSC00007-1.jpg)
2001 BMW 520iat
Posts: 1419
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - advice needed.
« Reply #1 on: Jul 29th, 2007, 5:26pm » |
Quote Modify
|
The waterhole seems to be where the temp sender sits. Here's a pic of my 2.0 16v (Sorry for the poor focus. I took it with my cell phone, and forgot to turn on macro mode) Edit: I'll go out and see if I can do some pictures for you. Mine's a 2.0 but it is mostly the same engine.
|
|
IP Logged |
http://uncyclopedia.org/wiki/Norway
|
|
|
Jonnycab
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i70.photobucket.com/albums/i101/jonnycab/JP_nitrous.gif)
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - advice needed.
« Reply #2 on: Jul 29th, 2007, 5:46pm » |
Quote Modify
|
Hi...in the first pic that is indeed where the matrix lower hose fits & the two EGR pipes go to the EGR transducer which is mounted near to the back of the air filter box. In the second picture, as Kjetil says, it is for the temp guage sender, although I've never seen a fitting that looks like that before. Usually it is a brass nut than is sunk into the t-stat housing. hth...
|
|
IP Logged |
|
|
|
Kjetil S
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i44.photobucket.com/albums/f41/kskjon/scorpio/avatars/DSC00007-1.jpg)
2001 BMW 520iat
Posts: 1419
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - advice needed.
« Reply #3 on: Jul 29th, 2007, 6:03pm » |
Quote Modify
|
Okay, here they are: The water hole is indeed for the temp sender (I just checked). I can't find your mysterious multiplug anywhere, so can't help you with that one. Here's a few pics of the EGR transducer and the matrix lower hose:
|
|
IP Logged |
http://uncyclopedia.org/wiki/Norway
|
|
|
Jonnycab
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i70.photobucket.com/albums/i101/jonnycab/JP_nitrous.gif)
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - advice needed.
« Reply #4 on: Jul 29th, 2007, 6:16pm » |
Quote Modify
|
The multiplug is for the temp guage sender The two lonely black pipes are for the vacuum hoses that go to the EGR vacuum regulator (right pipe) & the Evap canister purge valve (left pipe)
|
|
IP Logged |
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - advice needed.
« Reply #5 on: Jul 29th, 2007, 7:47pm » |
Quote Modify
|
GLANG! That's me little head hitting the table when me taking the deepest bow at your directions Gentlemen! Thanks about a million! The weird look on the temp cauge sender unit must have something to do with Volga. This engine was supposed to be installed into a Russian Volga Taxi. Thanks! Project continues! p.s. I have a tem sender unit - it won't fit into the pipe and it's plug is different from the multiplug shown in the pic, but I think i can manage with it!
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - again
« Reply #6 on: Aug 5th, 2007, 6:41am » |
Quote Modify
|
Hi everyone! Have had a huge pile of things to sort out with my engine swap project. I'm going to need a pile of parts in the future for it, so anyone 2.3 DOHC under breaking/broken stay alert. Outstanding problem is the PATS giving 1:6 error - Faulty connection between PATS and ECU it says. Anyone have had this? Then a question about the front stabilizer bar, could some take a peak under the car with a camera, I suspect they're different in 24V and in 16V. Yesterday started putting the struts back in and the stabilizer bar ends were pointing upwards, not downwards like they used to It seems to me that the DOHC engine front comes further down than the 24V. Gosh... I'm so close, I'm so close! And I'm so much in trouble, we need two cars or else... (that's my wife, the or else part )
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
Simmo
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm an OAP !
Posts: 5508
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - again
« Reply #7 on: Aug 5th, 2007, 6:52am » |
Quote Modify
|
Does THIS page help?. Try THIS one and the links on the left hand side as well.
|
|
IP Logged |
Now I'm an OAP
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - again
« Reply #8 on: Aug 5th, 2007, 11:03am » |
Quote Modify
|
Nope, not really, thanks Simmo. I've searched through the site and I also have a Ford T.I.S. CD but did not manage to see how it is in the 16V vs 24V. I removed the stabilizer bar and will get adaptors made for me in order to get it down about 2cm. Thanks for your time Simmo.
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
pat
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) Rover 75. Rover 620. Ford P100 Pickup.
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 545
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - again
« Reply #9 on: Aug 5th, 2007, 7:44pm » |
Quote Modify
|
Hi Pappa. Sorry to hear you have problems. I'm afraid I am offering only sympathy and thanks. I was contemplating dropping our 2.9's engine into the 2.0 estate which would give me the perfect(well almost!) car. I would have been lost with the problems you have had and have now decided to leave well alone. Good luck. Hope you get it sorted. I'm sure you will. Pat
|
|
IP Logged |
You don't have to be mad to own a Scorp - but it helps!
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - again
« Reply #10 on: Aug 6th, 2007, 5:12am » |
Quote Modify
|
Thanks for your sympathy Pat! Oh well, it's only technology so it can be sorted out, no doubt of that. It's just taking a bit too long to finish, we really need two cars in our household and that's what's putting pressure on the project. Having done this once, the second one is much easier, but it is a lot of work. Swapping between different engine types needs good preparation and it's just not the engine that has to be changed, there's more work to it. I will write a full report on my case, I have taken quite a lot of pictures while I've been at it. I also have been doing some more work at the same go, like changing the drivers side front wheel bearing - bloody **** should have taken it to somewhere! Those bearing parts are all rusted and the bearing itself won't come out without a hydraulic press. Well I knew it wouldn't be easy, but it did make such a bad noise already that it had to be done. All these little things and missing parts have taken a lot of time. I had to re-create the coolant hoses, new ones would have taken a week to come by and would have costed a small fortune. The exhaust pipe - would have costed a fortune, so I had to do it myself etc... The PATS, even though anticipated, was the greatest disappointment (In a way - it's working exactly as it should!). I was sure that the ECU that I had was programmed to work without the PATS, because it was meant to be put into a car without an immobiliser. Maybe that's the problem. But I will take the car to the local Ford, once I get bearing sorted and the stabilizer bar sorted and a trailer, and a car with a towing hook borrowed...
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
Kjetil S
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i44.photobucket.com/albums/f41/kskjon/scorpio/avatars/DSC00007-1.jpg)
2001 BMW 520iat
Posts: 1419
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - again
« Reply #11 on: Aug 6th, 2007, 8:37am » |
Quote Modify
|
I was thinking.. Have you tried hooking up some temporary wires, completely bypassing the PATS unit? I tried looking at the schematics, but they weren't too descriptive of the PATS, so except for the signal wire to the starter, I'm not sure what's needed though. You probably have this link already
|
|
IP Logged |
http://uncyclopedia.org/wiki/Norway
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - again
« Reply #12 on: Aug 6th, 2007, 9:12am » |
Quote Modify
|
Nope Kjetil, I did not have that link so thank you. I've always hated looking at wiring diagrams. Now I reckon I must start loving for the future There is an orange box attached on side of the PATS has anyone any idea what it is? It's connector looks very much the same as does the diagram in there: http://www.granada-and-scorpio-online.com/forums/showthread.php?s=74e162 2f76085e75d39073cce16b274d&threadid=69 Search for immobiliser and you'll find the diagram. I tried that without the PATS in the car, but it was a no go anyway. Ford says it needs a new key programming and if that's not going work, it may need new keys and them programmed... The PATS is signalling 1:6 - faulty connection between PATS & ECU - so I'm wondering why the key programming schema first?
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
TiberiuS
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i61.tinypic.com/29w0f81.jpg)
Ex. 1996 2.3 Ultima - RIP P789 KHJ
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 2257
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - again
« Reply #13 on: Aug 6th, 2007, 9:33am » |
Quote Modify
|
Hi. Maybe if you could get a matching ECU and PATS module from a 2.3 from the UK this would solve the issue? If the ECU you got was tuned for the Volga, perhaps the Ford one would be better suited to the Scorpio? The Volga is a heavy lump, perhaps the ECU is different because it's tuned for max economy over performance or something? Sorry if I'm missing something
|
|
IP Logged |
Bruce - '07 Jaguar XKR coupe, '95 Jaguar XJ Sport 4.0, '82 Ford Capri 2.0 Ghia, '15 Honda Civic (sloooooww..)
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - again
« Reply #14 on: Aug 6th, 2007, 9:40am » |
Quote Modify
|
on Aug 6th, 2007, 9:33am, TiberiuS wrote:Hi. Maybe if you could get a matching ECU and PATS module from a 2.3 from the UK this would solve the issue? |
| That's an idea yes. I need many other things as well, but I'll take the Ford route here first. I like these guys a my local Ford, they're very friendly and flexible. Have actually won many prizes in the Ford internal customer service competions. It really shows. If I only had the FDS2000/WDS2000 or like... mmm.... some day, I will get one!
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
Kjetil S
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i44.photobucket.com/albums/f41/kskjon/scorpio/avatars/DSC00007-1.jpg)
2001 BMW 520iat
Posts: 1419
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - again
« Reply #15 on: Aug 6th, 2007, 12:18pm » |
Quote Modify
|
My theory for the time being is that your car was originally wired to use the PATS (ignition, and possibly fuel pump and injectors connected via PATS system) and your new 2.3 doesn't have the PATS link in the ECU, so now your PATS system throws a fit. I would guess rewiring to bypass your PATS module will solve the problem. Then again, swapping for a PATS + ECU pair from another 2.3 may prove easier and should make life more difficult for car thieves.
|
|
IP Logged |
http://uncyclopedia.org/wiki/Norway
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - again
« Reply #16 on: Aug 6th, 2007, 12:44pm » |
Quote Modify
|
Kjetil, thanks for that. I agree with your theory and would rather re-wire the system to go without PATS. It is a time consuming task though and I will hear what Ford has to say prior I start making decisions on it.
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - again
« Reply #17 on: Aug 7th, 2007, 8:05pm » |
Quote Modify
|
WELL the Ford said: "I need a set of new keys programmed into the car... bring it over here and we'll do that. If it fails, then you may need some new blank keys to be programmed into it... " I'm pretty sure that's not right, so i'm putting my money on KIMI now. Kimi where are you!
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - Waiting for KI
« Reply #18 on: Aug 8th, 2007, 12:53pm » |
Quote Modify
|
Have continued my crusade on the Scorps and I can hear the fuel injectors activate when I turn on the ignition I just kind of started going through evertyhing again, while waiting Kimi to return to this site and came a across a blown fuse F43, then wiggled the Fuel Injection relay - srrrrr! - activated! But it's still not turning on the key. Tried it with a screwdriver directly between the starter motor solenoid and power, the starter turns it just right but still stays dead. I've removed PATS from it. Waiting KIMI's invention - anxiously - and continuing eliminating other obvious things...
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 DOHC installation on halt - Waiting for KI
« Reply #19 on: Aug 8th, 2007, 1:43pm » |
Quote Modify
|
Interesting... Opened the hatch over the spark plugs, drew out No. one plug, put a spare spark plug into and then used the screwdriver to power up the starter and turn the engine. Nice beautyfull spark! But it's a non starter anyway. Played with trunk inertia swicth for a while, it works. At least it pops up when you hit it and goes down when you press the button. Anyone got an idea on what's the relay inseide the armrest console? A yellow one, ticks on once you turn the key to Acc I position, ticks again when you try to start. I can hear a zzrrrrrrr! from the engine when I turn on the ignition, it lasts a few seconds then stops. This started today after I had wiggled the Fuel pump relay. But shouldn't the fuel pump sing along all the time when the ignition is on? I can't hear that. Isn't that in the tank? So putting my ear against the tank, I should hear it? The fuses seem all to be fine in aux & main box. I should be working, not here... having this monologue... I'm going grazy soon...
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
|