Author |
Topic: Instrument panel dead - although lights work (Read 459 times) |
|
dbrotzen
Newbie
I'm a YaBB newbie!
Posts: 20
|
|
Instrument panel dead - although lights work
« on: Aug 8th, 2007, 9:22pm » |
Quote Modify
|
My instrument panel is dead. Rev counter, speedometer etc. The lights work. At first the problem was intermittent - so it would be dead for a month, and then suddenly start working for a few days, and then back to dead. For the past 5 months, though, it's dead. Anyone's got a clue what this could be? I suspected a fuse problem, but as far as I can tell there aren't any dedicated instrument fuses.
|
|
IP Logged |
|
|
|
Scorpio123
Newbie
I'm a YaBB newbie!
Posts: 16
|
|
Re: Instrument panel dead - although lights work
« Reply #1 on: Aug 8th, 2007, 10:48pm » |
Quote Modify
|
Hi there, im suffering from the same problem myself, although the speedo works on & off, but the rev counter completely dead. Ive had a few replys to my post and could be the VSS in regard to the speedo, but rev counter ? Im going to take things to bits & have a fiddle around, if I get any joy will let you know what was causing it, or likewise if any other members give me other things to try, as they know more than I do about the problems. Simon
|
|
IP Logged |
|
|
|
SCORPY_NEWBY
Full Member
Scorpless but still an admirer!
Posts: 113
|
|
Re: Instrument panel dead - although lights work
« Reply #2 on: Aug 8th, 2007, 11:32pm » |
Quote Modify
|
Hi, Had a similar problem with mine then the fuse box got wet and i got alot of other problems. Rebuilt both fuse boxes and haven't had a problem since. Judging by the state of the fuse boxes i would say my problem was the contacts for most of the relays, (couldn't pin point a single culprit) very dirty and not very conductive. And if you do end up doing the boxes, Don't be daunted it's a lot easier than it looks
|
|
IP Logged |
|
|
|
Scorpio123
Newbie
I'm a YaBB newbie!
Posts: 16
|
|
Re: Instrument panel dead - although lights work
« Reply #3 on: Aug 9th, 2007, 9:55am » |
Quote Modify
|
Thanks for the info, scorpy_newby, is there any guides on the main site for how to remove & rebuild the fuse boxes ?
|
|
IP Logged |
|
|
|
dbrotzen
Newbie
I'm a YaBB newbie!
Posts: 20
|
|
Re: Instrument panel dead - although lights work
« Reply #4 on: Aug 9th, 2007, 12:23pm » |
Quote Modify
|
I had the fuse box replaced so unfortunately I don't think it's that. Someone earlier suggested there's a chip behind the panel that can sometimes burn out. I have not ventured into taking the panel apart, though.
|
|
IP Logged |
|
|
|
SCORPY_NEWBY
Full Member
Scorpless but still an admirer!
Posts: 113
|
|
Re: Instrument panel dead - although lights work
« Reply #5 on: Aug 9th, 2007, 1:26pm » |
Quote Modify
|
There are a couple of guides for the fuse boxes on this site, Should bring them up if you type in "fuse box rebuild". Haven't heard of a chip behind the panel so can't help there I'm afraid.
|
|
IP Logged |
|
|
|
dbrotzen
Newbie
I'm a YaBB newbie!
Posts: 20
|
|
Re: Instrument panel dead - although lights work
« Reply #7 on: Aug 15th, 2007, 8:47am » |
Quote Modify
|
Thanks all. Helpful with those pics which I hadn't found on my own.
|
|
IP Logged |
|
|
|
|