Author |
Topic: ABS light on (Read 567 times) |
|
phloid
Guest
|
Have had diagnostic check done. No faults found except no power supply to pump from ECU. Garage suspected internal ECU fault.
They have told me that to replace this unit will cost hundreds. Is this the case? I placed an ad in the breakers section but no replies.
Unit is a Teves Mk IV. 
|
|
 IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
 |
Re: ABS light on
« Reply #1 on: Sep 14th, 2007, 12:22pm » |
 Quote  Modify
|
Last time i heard a new ECU fitted from FMD was around the £700 mark.
I have a working 24v one you can have but you will probably need it programmed.
You dont appear to have posted a request anywhere for an ECU, was it on this site?
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy! |
|
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: ABS light on
« Reply #2 on: Sep 14th, 2007, 1:33pm » |
Quote Modify
|
Just checking, is it the ECU or did they mean the ABS controller?
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
phloid
Guest
|
Bill does say ECU fault.
Thanks Highlander £700 is way too much to pay given cars age. When you say ECU needs to be programmed what does that involve. I posted request on a link site - carbreakers I think.
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: ABS light on
« Reply #4 on: Sep 14th, 2007, 3:04pm » |
Quote Modify
|
I didn't think the ECU had anything to do with the ABS control module.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
Alastair
Full Member
2.3 Ghia X & MGB Roadster
Posts: 129
|
|
Re: ABS light on
« Reply #5 on: Sep 14th, 2007, 3:13pm » |
Quote Modify
|
Try this www.the-ecu-doctor.co.uk
What pump is the Auto electricial saying is getting no power from the ECU ?
Alastair
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: ABS light on
« Reply #6 on: Sep 14th, 2007, 3:28pm » |
Quote Modify
|
on Sep 14th, 2007, 3:04pm, Tompion wrote:| I didn't think the ECU had anything to do with the ABS control module. |
|
Sorry,
Worded that badly,
The ABS control module supplies power to the ABS pump, I didn’t think the ECU was involved.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
phloid
Guest
|
Sorry I am not technically minded. This is full wording from auto elec.
'Diagnostic check on ABS system & test pump motor & power to ECU. No faults found other than no power to pump from ECU. Suspect internal ECU fault.'
|
|
IP Logged |
|
|
|
phloid
Guest
|
Thanks for your help everyone. I have decided to reluctantly sell the car as I need a larger tow-car. See ad in for sale section.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print
Remove
