Author |
Topic: climate control problem (Read 377 times) |
|
daveh
Newbie
I'm a YaBB newbie!
Posts: 6
|
 |
climate control problem
« on: Oct 5th, 2007, 2:09pm » |
 Quote  Modify
|
The climate control panel on my 1996 2.3 ultima seems to have stopped working when i go over bumps it might start blowing on high but pushing anywhere on the panel might stop it. Error code 2 is showing. Any suggestions from you good folks ?
|
|
 IP Logged |
|
|
|
Kjetil S
Senior Member
2001 BMW 520iat
Posts: 1419
|
|
Re: climate control problem
« Reply #1 on: Oct 5th, 2007, 2:15pm » |
Quote Modify
|
I'm too lazy at the moment to check what code 2 is, but my uneducated guess would be a bad/loose connection behind the panel.
|
|
IP Logged |
http://uncyclopedia.org/wiki/Norway
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: climate control problem
« Reply #2 on: Oct 5th, 2007, 2:37pm » |
Quote Modify
|
Yep, check the multiplug at the back of it, it often gets dislodged when the dash has been off
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: climate control problem
« Reply #3 on: Oct 5th, 2007, 4:18pm » |
Quote Modify
|
Code 2 is a 'dodgy' air distribution or blower switch. As Stuart says probably the ribbon cable connector. Details are HERE
|
|
IP Logged |
Now I'm an OAP
|
|
|
daveh
Newbie
I'm a YaBB newbie!
Posts: 6
|
|
Re: climate control problem
« Reply #4 on: Oct 5th, 2007, 5:58pm » |
Quote Modify
|
Gentlemen your advice and help is greatly appreciated , thank you.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print