Author |
Topic: heater blower motor test/repair (Read 465 times) |
|
a11mcr
Junior Member
1995 Scorpio cosworth 24V ultima
Posts: 89
|
 |
heater blower motor test/repair
« on: Nov 8th, 2007, 11:10pm » |
 Quote  Modify
|
Hi i have looked through this site but cant find how to remove the heater blower motor (mine is not working) also bought a cd from ebay but it is mainly for a garage not for the diy bloke? (loads of stuff but usless to me)
your advice is greatly received.
Cheers
Mark
|
|
 IP Logged |
|
|
|
Jim
Full Member
1996 2.3 115k and rising
Posts: 121
|
|
Re: heater blower motor test/repair
« Reply #1 on: Nov 8th, 2007, 11:14pm » |
Quote Modify
|
Try this. Looks harder than it is. Mine didn't have the difficult screw in (never had).
http://www.fordscorpio.co.uk/fanrepair.htm
Jim
|
|
IP Logged |
Jim
|
|
|
a11mcr
Junior Member
1995 Scorpio cosworth 24V ultima
Posts: 89
|
|
Re: heater blower motor test/repair
« Reply #2 on: Nov 8th, 2007, 11:38pm » |
Quote Modify
|
Thanks, but do you have to cut in to it? or can the whole thing be removed??
Mark
|
|
IP Logged |
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: heater blower motor test/repair
« Reply #3 on: Nov 9th, 2007, 7:24am » |
Quote Modify
|
Have you read THISbefore pulling the thing apart. ?. If your car is fitted with a different type of HBC, one with three coils, there is a fix for that. The one shown,if defective, needs replacing.Just don't ring Fords for a new one...not good for the wallet or blood pressure!.
|
|
IP Logged |
Now I'm an OAP
|
|
|
a11mcr
Junior Member
1995 Scorpio cosworth 24V ultima
Posts: 89
|
|
Re: heater blower motor test/repair
« Reply #4 on: Nov 9th, 2007, 10:19am » |
Quote Modify
|
Right on the HBC at the control side i have 1.9V at low and 4.9V at full the fan output i have 10.9V at low and 12V at full also 12V + input but still no fan??.
sound like the fan and the HBC could be faulty?
Mark
|
|
IP Logged |
|
|
|
Jim
Full Member
1996 2.3 115k and rising
Posts: 121
|
|
Re: heater blower motor test/repair
« Reply #5 on: Nov 11th, 2007, 4:06pm » |
Quote Modify
|
Yes you do have to cut it, but it isn't as serious as it sounds and a piece of tape after reassembly seals it adequately. The alternative is removal of the whole heater unit from the inside.
Jim
|
|
IP Logged |
Jim
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print