Author |
Topic: 2.3 16V engine loom part number? (Read 616 times) |
|
a11mcr
Junior Member
1995 Scorpio cosworth 24V ultima
Posts: 89
|
 |
2.3 16V engine loom part number?
« on: Nov 29th, 2007, 6:15pm » |
 Quote  Modify
|
hi does anyone know the 2.3 16V engine loom part number? as ford quoted me £235+vat for this ?? (without the part number i told him its the ne that feeds the injectors!!) mine has no lable on it now (pressure washer!).
cheers
mark
|
|
 IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: 2.3 16V engine loom part number?
« Reply #1 on: Nov 29th, 2007, 6:28pm » |
Quote Modify
|
hi there
pm you reg/vin number and i'll look it up.
btw, it's called the fuel cut off loom.
hth
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: 2.3 16V engine loom part number?
« Reply #2 on: Nov 29th, 2007, 6:50pm » |
Quote Modify
|
hi there
try 1041754
that's for my 2.3 auto. your reg must have been changed at some point.
hth
|
|
IP Logged |
|
|
|
mindofitsown
Full Member
I'm a YaBB newbie!
Posts: 117
|
|
Re: 2.3 16V engine loom part number?
« Reply #3 on: Dec 11th, 2007, 5:44pm » |
Quote Modify
|
Hi, earlier this year I had exactly the same problem i.e that of finding the part number for the fuel cut off loom for my 2.0L 16V auto. To cut a very long story short, the eventual part no. was 1003462 available from local FMD at £97.15+Vat. In the thread of the article someone was enquiring about whether the same part no is used on the 2.3L. User 'peteHull' (I believe that's the correct name) also posted to say he had checked with his 2.3L and found it to definately be the same part.
What concerns me is that yet another part no is quoted in this thread Maybe its to do with man vs auto or 8V/16v etc??
|
|
IP Logged |
|
|
|
timduffy7
Junior Member
I'm a YaBB newbie!
Posts: 61
|
|
Re: 2.3 16V engine loom part number?
« Reply #4 on: Dec 11th, 2007, 10:21pm » |
Quote Modify
|
Hi all. As I've said " I'am not great with computers, so I hope those who offered there help get this message of thanks. Many thanks."
I have the Fuel cut off loom ordered through fordparts.uk. I gave them the VIN and REG numbers. They charged £83.24+VAT. Hope to get it at the end off the week. I will let you know if I have got the correct part then. The part number they gave me was 1063559
Thanks again Tim
|
|
IP Logged |
|
|
|
timduffy7
Junior Member
I'm a YaBB newbie!
Posts: 61
|
 |
Re: 2.3 16V engine loom part number?
« Reply #5 on: Dec 13th, 2007, 2:55pm » |
Quote Modify
|
Hi all, just to let you know I got the new Fuel Cut Off Loom, in the post today. Thanks to SCORPIO_MAN and MINDOFITSOWN.
I ordered the new Loom from fordpartsuk on Monday. I got an email on Tuesday to let me know they had despatched it. I got if from Parcel Force today Thursday. Thanks fordpartsuk for the great service.
I can confirm the part number (FINIS Code) is 1063559.
This is for a 2.3 manual 16v DOHC
Thanks all Tim
If anyone wishes to ring me for clarity; 028 4375 1427
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: 2.3 16V engine loom part number?
« Reply #6 on: Dec 13th, 2007, 6:27pm » |
Quote Modify
|
On the page on the website about fitting the loom it mentions that one of the connectors is difficult to fit. It’s easier to get at with the oil filter off so if you’re due an oil change, do it at the same time. It might be an idea to tape a draw wire to the old connector that you can then tape to the new one to pull it through, as it was a bit fiddly on mine to feed it through.
You could cut the old wire and make a temporary connection until you change the oil and pull it through then.
If you’ve got an airline give the big connector a blast as dirt tends to fall in when you separate it. I lifted the seal out to give it a clean as it was fairly mucky.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print