Author |
Topic: Coolant hose problem in inaccessible places (Read 951 times) |
|
grandadman
Full Member
This is what I need ;)
Posts: 189
|
 |
Coolant hose problem in inaccessible places
« on: Jan 24th, 2008, 9:33pm » |
 Quote  Modify
|
Has anybody recently had to change THIS little baby and can offer any assistance and Ford part number. It has cracked and is leaking coolant, water pump end, badly 
I should have changed this when I fitted the new water pump, having said that, hindsight is a wonderful thing yeah! 
|
|
 IP Logged |
|
|
|
grandadman
Full Member
This is what I need ;)
Posts: 189
|
|
Re: Coolant hose problem in inaccessible places
« Reply #2 on: Jan 24th, 2008, 10:00pm » |
Quote Modify
|
Hi scorpio_man
Top right- just under the cyl head, you will see the thermostat this component has 3 connections it is the elbow linking the water pump to the t/s which is nicely hidden under the A/C compressor motor. Click on my initial hyperlink to see its location. It is part of the circuit of hose 1
The part is not shown on this diagram - don't know why 
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: Coolant hose problem in inaccessible places
« Reply #3 on: Jan 24th, 2008, 10:12pm » |
Quote Modify
|
hi there
7334644 is a thick pipe to the middle of the t/s.
7334646 is a thin pipe to the top of the t/s.
does this help?
|
|
IP Logged |
|
|
|
grandadman
Full Member
This is what I need ;)
Posts: 189
|
|
Re: Coolant hose problem in inaccessible places
« Reply #4 on: Jan 24th, 2008, 10:48pm » |
Quote Modify
|
I think this is it it is a stumpy L shaped hose - I have updated my hyperlink HERE with a pic of this hose.
7334644 is a thick pipe to the middle of the t/s. NOT hose #1
The part is not shown on your diagram - don't know why 
|
|
IP Logged |
|
|
|
martin_rowe
Full Member
I love YaBB 1G - SP1!
Posts: 879
|
|
Re: Coolant hose problem in inaccessible places
« Reply #6 on: Jan 25th, 2008, 4:41pm » |
Quote Modify
|
its 24 on that picture, tis a bit of a b--- to do, the clip bites into the hose & cuts it, best to use 'original' type ss hose clip, it dose'nt go on the water pump very far, doe the other one through the cyl head a couple of times also.
|
|
IP Logged |
Rally Drivers Do It Sideways
|
|
|
grandadman
Full Member
This is what I need ;)
Posts: 189
|
|
Re: Coolant hose problem in inaccessible places
« Reply #7 on: Jan 25th, 2008, 6:31pm » |
Quote Modify
|
Thanx scorpio_man you are a STAR -
24= 7334644 is a thick pipe to the middle of the t/s. this looks like the one 
Hi Martin - ss hose clip have a look at my hyperlink again I have updated it because my Ford man couldn't find it either. Are these ss hose clamps the compression type the enlarged diag shows what looks like a Ford one on the t/s and a bog standard jubilee clamp at the water pump - agree
Thank fully I am halfway through the "tis a bit of a b--- to do" just need to get a new hose and two hose clamps and it's all downhill - I hope!
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print