Author |
Topic: Washer bottle motor? Easiest way? (Read 309 times) |
|
davem
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/boyandpc.gif) A member since August 2000
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 135
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Washer bottle motor? Easiest way?
« on: Mar 12th, 2008, 5:03pm » |
Quote Modify
|
'95 Cosworth - What's the easiest way to get to the windscreen washer bottle motor - to replace it and check the filter etc? Is it from underneith, behind the headlamp or whatever? Thanks
|
|
IP Logged |
'95 Cosworth - 185,000 miles and still going
|
|
|
mijfife
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 198
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Washer bottle motor? Easiest way?
« Reply #1 on: Mar 12th, 2008, 5:24pm » |
Quote Modify
|
Hi Davem, I've recently removed one from a '97 car so I'd assume it would be the same. Access is from underneath, you have to remove the wheel arch liner and if I remember correctly, the bottle is held on by three 10mm bolts. Cheers Jim
|
|
IP Logged |
'96 2.5TD Ultima estate running on veg oil!
|
|
|
Octavian_P
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i35.photobucket.com/albums/d190/Octavian_P/Avatare/Movie1.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 1126
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Washer bottle motor? Easiest way?
« Reply #2 on: Mar 13th, 2008, 7:37am » |
Quote Modify
|
Hi there I confirm, you need to undo the protective plastic wheel arch, then you have access. There are 3 bolts that need to be undone.
|
|
IP Logged |
2.0 16V Ultima|2.3 16V Ghia|2.9 24V Cosworth Ghia
|
|
|
|