Author |
Topic: gearbox problems (Read 493 times) |
|
pauls0701
Newbie
I'm a YaBB newbie!
Posts: 3
|
 |
gearbox problems
« on: May 3rd, 2008, 10:08pm » |
 Quote  Modify
|
hi all i have been a granada cossie owner for a while but have just brought the wife a scorpio its a m reg 2.0 16v ultima and we are having probs with the gear box
last week when driving it home form were we brought it i lost 4th gear to start with then when pulling away from some lights it wouldnt change up out of first so dropped the gear leaver down to second and it would go in to second. all this time the speedo wasnt working either other than when i braked the speedo would start working and you could feel it drop in to top gear but as soon as i let off the brake it would drop out again. got my mate to do a fault code check last sunday and it came up with speed sensor. but then it was fine for nearly a week but last night it started doing the same again with the added thing of the cruse control light coming on when braking also noticed that it seems to be lossing some gear box oil from somewhere. i have got it booked in with my mate next sat for him to have a look but would like to be able to give him an idea where to start looking.
|
|
 IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: gearbox problems
« Reply #1 on: May 4th, 2008, 8:01am » |
Quote Modify
|
THe best place to look is the VSS situated on the Nearside of the gearbox . Needs a new one by the sound of it , sends data to the ecu which just about controls everything.
Quite and easy DIY Job if you can get far enough underneath. I am sure someone else will give you an idea as to cost.
The gearbox oil can be coming from a couple of places .. the Oil Cooler pipes or the front oil seal
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
pauls0701
Newbie
I'm a YaBB newbie!
Posts: 3
|
|
Re: gearbox problems
« Reply #2 on: May 4th, 2008, 2:25pm » |
Quote Modify
|
well have done about 70 mile in the car today and all was well. having read on here about the wiring looms not being very good i have got a new gearbox loom coming. although i not had any probs with the engine wiring while changing the gearbox loom does any one think it might be worth changing that to
|
|
IP Logged |
|
|
|
pauls0701
Newbie
I'm a YaBB newbie!
Posts: 3
|
|
Re: gearbox problems
« Reply #3 on: May 8th, 2008, 7:49pm » |
Quote Modify
|
still been having problems with it so this is what has been haping over the last week or so
picked a gear box up monday it is now sat in my garage so if i need it its there and the oil from it is now all over the boot floor in my car so thats a job for me to do on my car now. got the wiring loom now which i will be inspecting and testing prior to it being fitted also got a new speed sensor so plan for next sat is this
fit new gear box wiring loom
fit new speed sensor
renew gearbox filter. sump gasket, and filter o rings (all on order from ford parts uk)
renew gear box oil
if after doing all this it doesnt cure the problems then the gearbox will be thrown in
|
|
IP Logged |
|
|
|
TiberiuS
Senior Member
Ex. 1996 2.3 Ultima - RIP P789 KHJ
Posts: 2257
|
|
Re: gearbox problems
« Reply #4 on: May 8th, 2008, 9:50pm » |
Quote Modify
|
Paul, good luck with it...sounds like you've got it sussed and you're going about it in the right order.
There is a great deal about these kinds of faults on the forum, you might find something helpful. If the scan showed the VSS you might be lucky and not have to touch the box itself.
Regards, Bruce.
|
|
IP Logged |
Bruce - '07 Jaguar XKR coupe, '95 Jaguar XJ Sport 4.0, '82 Ford Capri 2.0 Ghia, '15 Honda Civic (sloooooww..)
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print