Author |
Topic: Auxiliry fuse box (Read 529 times) |
|
chinton
Newbie
I'm a YaBB newbie!
Posts: 8
|
|
Auxiliry fuse box
« on: Jun 21st, 2008, 5:16pm » |
Quote Modify
|
Hi all, Could someone tell me the position of the bridges in R22 and R23 in the auxiliary fuse box. My A/C compressor is not working and I wanted to start from scratch. Regards.
|
|
IP Logged |
|
|
|
ChrisF
Full Member
All the Granny's now the best 98 2.3 16v Ultima
Posts: 136
|
|
Re: Auxiliry fuse box
« Reply #1 on: Jun 21st, 2008, 7:28pm » |
Quote Modify
|
Have you checked that the refrigerant isnt very low, if it is the compressor wont cut in.
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: Auxiliry fuse box
« Reply #2 on: Jun 21st, 2008, 11:38pm » |
Quote Modify
|
Try to turn the compressor clutch wheel by hand (engine off ).....if it won't turn, then there is a good chance that the compressor may be seized
|
|
IP Logged |
|
|
|
chinton
Newbie
I'm a YaBB newbie!
Posts: 8
|
|
Re: Auxiliry fuse box
« Reply #3 on: Jun 22nd, 2008, 1:59pm » |
Quote Modify
|
Forgot to say, it is a brand new compressor and I have had the system topped up but the compressor won't run. I have a bridge missing from the aux. fuse box.
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: Auxiliry fuse box
« Reply #4 on: Jun 22nd, 2008, 2:45pm » |
Quote Modify
|
hi there have you checked the WOT relay? hth
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: Auxiliry fuse box
« Reply #5 on: Jun 22nd, 2008, 5:46pm » |
Quote Modify
|
Neither my car (with aircon) nor my spare fuse box have a bridge in R23. Bridge R22 is between the slots alongside R21 & R17.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
|