Author |
Topic: scorpio cv (Read 425 times) |
|
python9
Full Member
1997 24v ghia saloon
 
Posts: 241
|
 |
scorpio cv
« on: Oct 31st, 2008, 10:13am » |
 Quote  Modify
|
i am getting a noise like a cranking noise from the rear passenger wheel i think the cv joint is gone is there a giude for doing this job
|
|
 IP Logged |
|
|
|
Scorpio_Mike
Senior Member
Jeep Grand Cherokee 3.0 V6 & 2.8 Sierra XR4i 4x4
Posts: 2354
|
|
Re: scorpio cv
« Reply #2 on: Oct 31st, 2008, 11:14am » |
Quote Modify
|
Yep, definately sounds like the CV joint.
|
|
IP Logged |
Star sign is Scorpio !
Sierra XR4i's are great...especially when fitted with 4WD 
|
|
|
python9
Full Member
1997 24v ghia saloon
Posts: 241
|
|
Re: scorpio cv
« Reply #3 on: Oct 31st, 2008, 12:37pm » |
Quote Modify
|
thanks for the verification that it is the cv i went to the local motor factor got a new cv joint going to change the cv after lunch looks an easy job cost £32 but when i take the old one back i get a fiver back priced the wheel bearings while i got the cv there £27 each not bad thats my next job when i do the rear discs and pads fogot to mention in my earlier post about my steering rack leak i got a new track rod and shaft forthe nearside of the stearing rack now i dont have a leak
track rod end a fiver newball joint shaft from ford £43
beats £400 for new rack
|
|
IP Logged |
|
|
|
python9
Full Member
1997 24v ghia saloon
Posts: 241
|
|
Re: scorpio cv
« Reply #5 on: Oct 31st, 2008, 9:22pm » |
Quote Modify
|
update the cv joint i got was no use as the bolt holes wher for m8 bolts the bolts on the cv joint on the car is has bigger holes for the bolts and the m8 bolts were far to small so can anyone tell me what cv joint i should get ford scorpio 2.5 tdi estate
|
|
IP Logged |
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: scorpio cv
« Reply #6 on: Oct 31st, 2008, 9:45pm » |
Quote Modify
|
python9.
The V6s and diesels all have the thicker bolts.
GOZZ
|
|
IP Logged |
|
|
|
python9
Full Member
1997 24v ghia saloon
Posts: 241
|
|
Re: scorpio cv
« Reply #7 on: Nov 1st, 2008, 12:06am » |
Quote Modify
|
cheers gozz it says on the guide that the 2.0 2.3 and 2.5 tdi are the same and 2.9 and 24v are both the same i think it needs to be corrected so othere members dont make the same mistake
|
|
IP Logged |
|
|
|
Scorpio_Mike
Senior Member
Jeep Grand Cherokee 3.0 V6 & 2.8 Sierra XR4i 4x4
Posts: 2354
|
|
Re: scorpio cv
« Reply #8 on: Nov 1st, 2008, 1:10pm » |
Quote Modify
|
Strange 
http://www.carparts-direct.co.uk/cv_joints_detail.cfm show 2.0, 2.3 & 2.5TDi as using the same part and a different part for all V6's
Check with your FMD - they should be able to advise which part is correct from the chassis number.
|
|
IP Logged |
Star sign is Scorpio !
Sierra XR4i's are great...especially when fitted with 4WD
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print
Too much for an old boy!