Author |
Topic: cossie stalling (Read 921 times) |
|
david49uk
Full Member
I'm a YaBB newbie!
Posts: 282
|
 |
cossie stalling
« on: Jun 7th, 2009, 1:43am » |
 Quote  Modify
|
Hi again got a small problem sometimes not allways when you put car into gear it will stall normally it will do this twice then all is normal again. this happens with ac on or of. cossie auto. dave49uk
|
|
 IP Logged |
|
|
|
tonyboy
Full Member
black2.924Vcoss ( No More )
 
 
Posts: 998
|
|
Re: cossie stalling
« Reply #1 on: Jun 7th, 2009, 2:50am » |
Quote Modify
|
I have the same prob with my scorp, Sometimes it stalls , mostly when i put it in reverse, Or when i turn the wheel full lock. and mostly when the A/C is on................. strange.... sometimes i wish i was clever<<<<< mechanicaly.... the only things iv,e learnt is on this site.. maybe i,ll tell more , sometime.. 
|
|
IP Logged |
I think i'm going, erm what do you call it..... Senial.... 
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: cossie stalling
« Reply #2 on: Jun 7th, 2009, 4:58am » |
Quote Modify
|
David, sounds like it could be a sticking autobox solenoid....they tend be worse in winter at start up on a frosty morning
tonyboy, if it's stalling when the steering is on full lock, then you may have a faulty power steering pressure switch
What does the autobox fluid look like ?
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: cossie stalling
« Reply #3 on: Jun 7th, 2009, 11:06am » |
Quote Modify
|
on Jun 7th, 2009, 2:50am, tonyboy wrote:| mostly when the A/C is on................. |
|
aircon compressor sticking?
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy! |
|
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: cossie stalling
« Reply #4 on: Jun 7th, 2009, 11:22am » |
Quote Modify
|
hi there
i'd go for giving the idle by valve a clean. to be it sounds like it's not holding the revs with a load is applied.
remember to take note of the direction the multi plug is facing as the valve can go on the wrong way round.
there you go, 3 ideas to work from!
hth
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: cossie stalling
« Reply #5 on: Jun 7th, 2009, 11:27am » |
Quote Modify
|
clean the MAF  4!
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:| I give up ! Too much for an old boy! |
|
|
|
|
david49uk
Full Member
I'm a YaBB newbie!
Posts: 282
|
|
Re: cossie stalling
« Reply #6 on: Jun 7th, 2009, 8:50pm » |
Quote Modify
|
on Jun 7th, 2009, 11:22am, scorpio_man wrote:hi there
i'd go for giving the idle by valve a clean. to be it sounds like it's not holding the revs with a load is applied.
remember to take note of the direction the multi plug is facing as the valve can go on the wrong way round.
there you go, 3 ideas to work from! which way is the right way to the left or to the right then i can make sure it is the right way first, dave
hth |
|
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: cossie stalling
« Reply #8 on: Jun 7th, 2009, 9:27pm » |
Quote Modify
|
hi there
remember that photo is looking through the bulkhead, so to speak. IE the back of the engine.
hth
|
|
IP Logged |
|
|
|
david49uk
Full Member
I'm a YaBB newbie!
Posts: 282
|
|
Re: cossie stalling
« Reply #9 on: Jun 8th, 2009, 2:48am » |
Quote Modify
|
thanks for that will look tomorow dave.
|
|
IP Logged |
|
|
|
david49uk
Full Member
I'm a YaBB newbie!
Posts: 282
|
|
Re: cossie stalling
« Reply #10 on: Jun 11th, 2009, 1:58am » |
Quote Modify
|
i have cleaned the idle valve will let you no if it occurs again, dave
|
|
IP Logged |
|
|
|
Scorpio
Full Member
Posts: 562
|
|
Re: cossie stalling
« Reply #11 on: Jun 12th, 2009, 8:30pm » |
Quote Modify
|
David which solution did you use on the idle by valve and has it worked!
|
|
IP Logged |
|
|
|
david49uk
Full Member
I'm a YaBB newbie!
Posts: 282
|
|
Re: cossie stalling
« Reply #12 on: Jun 17th, 2009, 12:55pm » |
Quote Modify
|
carbureter cleaner from wilco works fine had no problem since, dave
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print