Author |
Topic: My first problems (Read 690 times) |
|
Pelle
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm sorry for my poor english!
Posts: 4
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
My first problems
« on: Jul 26th, 2009, 12:09am » |
Quote Modify
|
Hello all, Sweden calling *S* Got my first Scorpio 2 days ago and have som qustions. My left headlight wont work, i get ~9volt when its disconnected (motor not running) and allmost nothing when the bulp is connected. Can anyone give me some tips? It works when i get power from the right side light. My echaust is corroded after the cathalyst but befor the front pipe, what to do? by a pipe of tube and weld? dimensions? And finaly, im gona put in a cd-changer (an old kenwood kdc-c510fm) but dont know where to put it *s*. Where is it put orginal? Are there any pre-wiring, only need constant +, and +when the ignition is on and - (ground). Sorry for my poor english, but i hope you understand and can get me some tips.
|
|
IP Logged |
|
|
|
tonyboy
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) black2.924Vcoss ( No More )
![Tony+Redden](https://www.fordscorpio.co.uk/YaBBImages/aim.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 998
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: My first problems
« Reply #1 on: Jul 26th, 2009, 12:45am » |
Quote Modify
|
on Jul 26th, 2009, 12:09am, Pelle wrote:Hello all, Sweden calling *S* Got my first Scorpio 2 days ago and have som qustions. My left headlight wont work, i get ~9volt when its disconnected (motor not running) and allmost nothing when the bulp is connected. Can anyone give me some tips? It works when i get power from the right side light. |
| Make sure the multiplug at the fuse box is in properly. Could try continuity test between the multi plug at the fuse box, and the socket at the light end.
|
|
IP Logged |
I think i'm going, erm what do you call it..... Senial....
|
|
|
wojtekor
Guest
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
|
originally the cd-changer was mounted in the boot. there will be no wiring for it if there wasn't one originally. what's your head unit? your cd changer won't work with a Ford head unit unless you have a proper interface/adapter for it...
|
|
IP Logged |
|
|
|
Snoopy
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/angryboy.gif) Very old.BAD tempered and missing friends.
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 6278
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: My first problems
« Reply #3 on: Jul 26th, 2009, 5:12pm » |
Quote Modify
|
Also check the plug on the raer of the ehadlamp switch for burningand the like . Its seay to get it out. Common fault and can cause a lot of similar problems. As Tony states the MULTIPIN plug on the fuse box has also been known to give similar syptoms. It appears to connect properly but is often one row of pins out. Take time and check it very carefully.
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
tonyboy
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) black2.924Vcoss ( No More )
![Tony+Redden](https://www.fordscorpio.co.uk/YaBBImages/aim.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 998
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: My first problems
« Reply #4 on: Jul 26th, 2009, 8:06pm » |
Quote Modify
|
My Expeirience Of A Headlight Problem First of all, apart from checking fuses 10/11 and mainbeam bulbs Check that the multiplug at the fuse box is properly seated, as this can cause all sorts of weird electrical problems. 1. Test to see if power getting to the stalk/ switch (Green Wire ) 2. Test to see if power getting to the fuse box from multiplug at stalk/ switch ( Yellow/Red ) fuse 10/11 If no power Test it to the multiplug going into the fuse box ( under the dash ) ( Do the above tests with the fuse box multiplug connected ) ( If above tests are done with multiplug disconnected, when stalk/ switch is switched to mainbeam on, the test will show no voltage, and when mainbeam is off ther will be a voltage present. Which made me think the switch was faulty ) 3. Test for continuity between multiplug at fuse box end to the socket at headlight end ( Violet/Orange for R/H side, Violet/Black for L/H side ) 4. Check the lighting switch on the dash above the coin box. Check for any burning or melted in the socket 5. Whist going through the tests have a look at the connections to see if there clean. If they check out ok, which was in my case it is probably the fuse box I'm no auto electrician and this is just my expeirience
|
|
IP Logged |
I think i'm going, erm what do you call it..... Senial....
|
|
|
Pelle
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm sorry for my poor english!
Posts: 4
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: My first problems
« Reply #5 on: Jul 27th, 2009, 11:37am » |
Quote Modify
|
Thanks for all the tips. I have connection and power betwen the multiconnector and the headlamp, and now after cleaning and testing i got 12volt to the connector for halflight, but when i plugg it in to the bulp i just get 0,03volt? Can it be anything but the fusebox? its seems to loose power when its under load/strain (cant get the right translation). To day i will try to look under the fuse box. Its a lefthand drive så everything it mirroved, even the color on the wirring. Anyone know where to ordering catalyst and exchoust system? its seem to be mutch sheeper from uk.
|
|
IP Logged |
|
|
|
tonyboy
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) black2.924Vcoss ( No More )
![Tony+Redden](https://www.fordscorpio.co.uk/YaBBImages/aim.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 998
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: My first problems
« Reply #6 on: Jul 27th, 2009, 5:44pm » |
Quote Modify
|
If your getting 12V at the connector then 0.3V when connected you could try putting a bridge between the headlight connector and the bulb see if your getting 12V then. But the headlight connector must be connected because of the ground wire ( black ) if that works ok it's probably the wire beween the bulb and the connector, If it's still reading 0.3V it could be the ground wire hope this helps
|
|
IP Logged |
I think i'm going, erm what do you call it..... Senial....
|
|
|
|