Author |
Topic: WIRING HARNESS (Read 1247 times) |
|
kevstoke
Newbie
I'm a YaBB newbie!
 
Posts: 5
|
 |
WIRING HARNESS
« on: Nov 18th, 2009, 6:36pm » |
 Quote  Modify
|
MY WIRIING HARNESS FROM THE FUSE BOX AS DECIDED TO CATCH FIRE CAUSE A FRIEND DECIDED TO PLAY WITH THE RELAY FUSES I HAVE AQUIRED A REPLACEMENT WIRING HARNESS BUT UNSURE HOW TO FIT IT CAN ANYONE HELP MANY THANKS FOR READING KEV
|
|
 IP Logged |
|
|
|
tonyboy
Full Member
black2.924Vcoss ( No More )
  
Posts: 998
|
|
Re: WIRING HARNESS
« Reply #1 on: Nov 18th, 2009, 8:37pm » |
Quote Modify
|
( whispering ) caps on makes it look as if your shouting......... Be warned!!!!!!!!!! 
|
|
IP Logged |
I think i'm going, erm what do you call it..... Senial.... 
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: WIRING HARNESS
« Reply #2 on: Nov 19th, 2009, 9:21am » |
Quote Modify
|
on Nov 18th, 2009, 6:36pm, kevstoke wrote:| MY WIRIING HARNESS FROM THE FUSE BOX AS DECIDED TO CATCH FIRE CAUSE A FRIEND DECIDED TO PLAY WITH THE RELAY FUSES I HAVE AQUIRED A REPLACEMENT WIRING HARNESS BUT UNSURE HOW TO FIT IT CAN ANYONE HELP MANY THANKS FOR READING KEV |
|
You dont say which fusebox it is, but its simply a matter of following the loom, releasing cable ties and disconnecting the plugs, you may have to remove trim to gain access to it.
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy! |
|
|
|
|
Glyn
Full Member
Now an OAP ! 95 cossie and another !and a 12v
Posts: 584
|
|
Re: WIRING HARNESS
« Reply #4 on: Feb 17th, 2010, 3:21pm » |
Quote Modify
|
I need a new engine harness. Was yours new or from a breakers ?
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: WIRING HARNESS
« Reply #5 on: Feb 17th, 2010, 4:12pm » |
Quote Modify
|
I think Niceman rewired his original loom Glyn, they are/were available new up until recently but i'm pretty sure they are VERY expensive, well into the hundreds of pounds.
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:| I give up ! Too much for an old boy! |
|
|
|
|
Glyn
Full Member
Now an OAP ! 95 cossie and another !and a 12v
Posts: 584
|
|
Re: WIRING HARNESS
« Reply #6 on: Feb 18th, 2010, 12:02am » |
Quote Modify
|
Thanks Highlander.
Glyn
|
|
IP Logged |
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: WIRING HARNESS
« Reply #7 on: Feb 19th, 2010, 2:06pm » |
Quote Modify
|
If it's any of the fuse boxes, the feeds to the bottom are all built into the main harness and the replace it would be a mammoth task just thinking about it as those pictures show.
I carefully took one out of my 2 Lt 16v and have still got it in the shed, it's just sat there in a bag where I dropped it cos it's so Darn heavy.
I would admire anyone who removes and fits a replacement, but if you do then I would highly recommend taking Photo's of every stage.... Good luck.
Pete
|
|
IP Logged |
Bring back fair wages.........
|
|
|
geoff_bateman
Newbie
2.9 12v Estate
Posts: 16
|
|
Re: WIRING HARNESS
« Reply #8 on: Feb 23rd, 2010, 9:33pm » |
Quote Modify
|
Local Ford dealer told me that there are 4 harnesses in the vehicle and that all were listed as being no longer available from Ford. I'd asked because the engine harness on my V6 12V was in a very poor condition due to insulation degradation and I was after a replacement. In the end I had to strip it down and repair/replace as necessary to get it sorted. I also rerouted it all to keep it further away from the cylinder head to try and reduce any thermal degradation in future.
|
|
IP Logged |
|
|
|
Glyn
Full Member
Now an OAP ! 95 cossie and another !and a 12v
Posts: 584
|
|
Re: WIRING HARNESS
« Reply #9 on: Mar 1st, 2010, 2:47pm » |
Quote Modify
|
Just an update on the engine wiring harness - the local Ford supplier says that they have been withdrawn and last known price for the 24v was £1500 + vat !!
Glyn
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print
