Author |
Topic: Need help badly (Read 1362 times) |
|
lebelbelshaw
Newbie
I'm a YaBB newbie!
Posts: 20
|
|
Need help badly
« on: Jul 3rd, 2010, 6:47pm » |
Quote Modify
|
I have just finished doing the head gasket on my 2 litre Scorpio 16v and it is only running on three cylinders. Some of the wiring to the coil packs was faulty but I have now rectified this all spark plugs are sparking and the injectors seem fine. I have come to a stand still as I didn't have this problem before I started.
|
|
IP Logged |
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: Need help badly
« Reply #1 on: Jul 3rd, 2010, 7:18pm » |
Quote Modify
|
are you sure its miss firing and not just miss timed? there are 3 marks on the bottom pulley, from memory its the left had one if you get what i mean? are you sure the injectors wiring plugs are fully down, again from memory i think the first 3 injectors are all in one housing and the 4th on its own
|
|
IP Logged |
FDS2000 Scans - Birmingham
|
|
|
lebelbelshaw
Newbie
I'm a YaBB newbie!
Posts: 20
|
|
Re: Need help badly
« Reply #2 on: Jul 3rd, 2010, 7:23pm » |
Quote Modify
|
What does the left hand mark have to line up with and I have check the injector there all sat on right
|
|
IP Logged |
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: Need help badly
« Reply #3 on: Jul 3rd, 2010, 7:30pm » |
Quote Modify
|
there should be a peg that stick out just above the bottom pulley, you may have it just off top dead (middle mark) you'll need the rocker cover and front plate off again, also check the chain tensioner has released you need to give them a tap to free them off have a read of this manual http://www.fordscorpio.co.uk/manual/engines/dohc16v/DOHC16VCHead.pdf Matt
|
|
IP Logged |
FDS2000 Scans - Birmingham
|
|
|
lebelbelshaw
Newbie
I'm a YaBB newbie!
Posts: 20
|
|
Re: Need help badly
« Reply #4 on: Jul 3rd, 2010, 7:33pm » |
Quote Modify
|
I checked all the aligment as described in the manual for the head gasket is there anything else you can think of any sensors.
|
|
IP Logged |
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: Need help badly
« Reply #5 on: Jul 3rd, 2010, 7:35pm » |
Quote Modify
|
theres the cam shaft sensor on the side of the cylinder head
|
|
IP Logged |
FDS2000 Scans - Birmingham
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: Need help badly
« Reply #6 on: Jul 3rd, 2010, 7:38pm » |
Quote Modify
|
give the fuel line connectors a check over to, ive known them to not fully locate before, theres various vacumme hoses on the intake manifold, maf sensore on the air box the coil packs are wasted spark so if the main unit is firing so should the plug on the lead, unless you have a break in the casing and its shorting on the rocker cover
|
|
IP Logged |
FDS2000 Scans - Birmingham
|
|
|
lebelbelshaw
Newbie
I'm a YaBB newbie!
Posts: 20
|
|
Re: Need help badly
« Reply #8 on: Jul 3rd, 2010, 7:54pm » |
Quote Modify
|
Thanks I will look at all these points in the morning and post my finding hopefully it will be sorted tomorrow
|
|
IP Logged |
|
|
|
lebelbelshaw
Newbie
I'm a YaBB newbie!
Posts: 20
|
|
Re: Need help badly
« Reply #9 on: Jul 4th, 2010, 4:45pm » |
Quote Modify
|
I have just finished checking all fuel lines and sensors. I have got to the timing part and I haven't got any gold links on my chain or dots on the cam sprockets as described in the manual I also can't find a peg as described by matt above the pulley. Any surjestions
|
|
IP Logged |
|
|
|
lebelbelshaw
Newbie
I'm a YaBB newbie!
Posts: 20
|
|
Re: Need help badly
« Reply #10 on: Jul 5th, 2010, 9:37pm » |
Quote Modify
|
I have now sorted the timing out ( I think) as it is running on 4 cylinders. I am now suffering with a bit of miss fire and poor idle. Any tips on what to check now. I was also wondering how much the diagnostics kits are for the scoripo.
|
|
IP Logged |
|
|
|
Highlander
Moderator Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Need help badly
« Reply #11 on: Jul 5th, 2010, 10:38pm » |
Quote Modify
|
Was it working ok before the head gasket? If so I think its just a case of checking over everything you have done or touched. When you say you checked the sensors how did you check them?
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
tlundkvi
Full Member
Ex. Scorpio 2.9 24V -95
Posts: 909
|
|
Re: Need help badly
« Reply #12 on: Jul 6th, 2010, 6:54am » |
Quote Modify
|
on Jul 5th, 2010, 9:37pm, lebelbelshaw wrote: I was also wondering how much the diagnostics kits are for the scoripo. |
| If you don't care about ABS codes, almost any ELM-based lead off ebay will work, costs £15 or so.
|
|
IP Logged |
|
|
|
lebelbelshaw
Newbie
I'm a YaBB newbie!
Posts: 20
|
|
Re: Need help badly
« Reply #13 on: Jul 6th, 2010, 9:01am » |
Quote Modify
|
I have check they have clipped in right
|
|
IP Logged |
|
|
|
lebelbelshaw
Newbie
I'm a YaBB newbie!
Posts: 20
|
|
Re: Need help badly
« Reply #14 on: Jul 6th, 2010, 10:38am » |
Quote Modify
|
Does anyone know if the diagnostics on the Scorpio is obd 1 or obd 2
|
|
IP Logged |
|
|
|
lebelbelshaw
Newbie
I'm a YaBB newbie!
Posts: 20
|
|
Re: Need help badly
« Reply #16 on: Jul 13th, 2010, 9:07am » |
Quote Modify
|
All fixed I had the first injector wire and the first coil pack wire the wrong way round.
|
|
IP Logged |
|
|
|
Mike H
Senior Member
Renault Clio
Posts: 2594
|
|
Re: Need help badly
« Reply #17 on: Jul 13th, 2010, 3:08pm » |
Quote Modify
|
Thank goodness for that! Always the simple things innit
|
|
IP Logged |
Mike H
|
|
|
lebelbelshaw
Newbie
I'm a YaBB newbie!
Posts: 20
|
|
Re: Need help badly
« Reply #18 on: Jul 14th, 2010, 9:53am » |
Quote Modify
|
yep felt stupid when i realised after checking the timing twice and redoing half the wiring thinking something was shorting out oh well all done now and she is running sweet as a nut. Just got to sort out the back bumper and she will look brand new
|
|
IP Logged |
|
|
|
Mike H
Senior Member
Renault Clio
Posts: 2594
|
|
Re: Need help badly
« Reply #19 on: Jul 15th, 2010, 12:16pm » |
Quote Modify
|
Majik
|
|
IP Logged |
Mike H
|
|
|
|