Click to return to main site

Welcome, Guest. Please Login or Register.
Jul 19th, 2024, 10:40am


Balance: £16.65
Home Home Help Help Search Search Members Members Login Login
Ford Scorpio Forum« ABS problem. HELP »
   Ford Scorpio Forum
   General
   Problems
(Moderators: admin, Highlander, scorpio_man, Baz, Simmo)
   ABS problem. HELP
« Previous topic | Next topic »
Pages: 1  Reply Reply Send Topic Send Topic Print Print
   Author  Topic: ABS problem. HELP  (Read 1136 times)
bielas
Newbie
*



Scorpio 1995 2.5TD Ghia

   
View Profile WWW

Posts: 2
ABS problem. HELP
« on: Jan 29th, 2013, 7:55pm »
Quote Quote Modify Modify

Hi all. Embarassed
 
I have a problem with the ABS system on my car. The first days when braking at low speeds (5-10 mph more or less) the brake pedal shakes when it runs the ABS. Now the ABS light does not turn off when you start the engine and stays on all the time.  
 
I cleaned and tested all sensors from the module connector, RR, RL, FL give values of 1030 omhs, but the FR sensor gives a value of 1650 Omhs. Before connector modules are all equal values 1030 Omhs. The problem of ABS light on may be in the wiring from the sensor connector to the connector RL module? Thanks for the help. I a new member
 
My car is Scorpio 1995 2.5TD VM engine.  
 
Regards, Rafa.
IP Logged
Glyn
Full Member
***



Now an OAP ! 95 cossie and another !and a 12v

   
View Profile

Posts: 584
Re: ABS problem. HELP
« Reply #1 on: Jan 29th, 2013, 8:44pm »
Quote Quote Modify Modify

Have a look at the connector on the inside of the right front wing in the wheel archt They can collect dirt or corrode. Chech the resistance after cleaning the pins> There have been reports on this site of the wires corroding near the connector.
IP Logged
PJDavis
Senior Member
****




2 x 1995 Jag X300 3.2 / 4.0 (Henley)   1957 XK140

   
View Profile Email

Posts: 1474
Re: ABS problem. HELP
« Reply #2 on: Jan 29th, 2013, 10:02pm »
Quote Quote Modify Modify

Even if the connector seem to be ok, take it apart and 'wiggle' the metal parts, they are often broken inside.   I had to 'hard-wire' with solder my drivers-side connector in the wheel-arch, this was the only way to fix the same problem you have.
Peter
IP Logged

I love 'Movvy'
1995 Jaguar XJ6 X300 3.2 (Henley)
1995 Jaguar XJ6 X330 4.0 (Dopey)
1957 Jaguar XK140 USA (converted to RHD, and to have fitted Mk10 420G Engine with BW 65 Auto Trans)
bielas
Newbie
*



Scorpio 1995 2.5TD Ghia

   
View Profile WWW

Posts: 2
Re: ABS problem. HELP
« Reply #3 on: Jan 30th, 2013, 11:44am »
Quote Quote Modify Modify

Thanks glyn and PJDavis.
 
I tested the connectors in the afternoon and I will tell you the results.
rafa
IP Logged
Pages: 1  Reply Reply Send Topic Send Topic Print Print

« Previous topic | Next topic »

Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.