Author |
Topic: Scorpio ult 1996 93000K (Read 1315 times) |
|
jls1936
Newbie
I'm a YaBB newbie!
Posts: 47
|
|
Scorpio ult 1996 93000K
« on: Jul 27th, 2013, 1:09pm » |
Quote Modify
|
I suppose it had to happen some day. Failed MOT on emmissions. Cat not working. Local garage has ordered a cat but telephone call this morning said doubts about the quality, however it has got a 2 yr guarantee. He said if it was his car he would fit it as the age of the car doesn't warrant paying Ford parts cost. I do not know what the bill is going to be! But I need a car and what would I pay to get a car with the comfort of my Scorpio. JLS 1936
|
|
IP Logged |
|
|
|
Glyn
Full Member
Now an OAP ! 95 cossie and another !and a 12v
Posts: 584
|
|
Re: Scorpio ult 1996 93000K
« Reply #1 on: Jul 27th, 2013, 2:16pm » |
Quote Modify
|
What engine? Tried catsdirect? worked ok for my 24v's.
|
|
IP Logged |
|
|
|
amigafan2003
Full Member
I'm a YaBB newbie!
Posts: 972
|
|
Re: Scorpio ult 1996 93000K
« Reply #2 on: Jul 27th, 2013, 6:54pm » |
Quote Modify
|
It'll be fine.
|
|
IP Logged |
|
|
|
PJDavis
Senior Member
2 x 1995 Jag X300 3.2 / 4.0 (Henley) 1957 XK140
Posts: 1474
|
|
Re: Scorpio ult 1996 93000K
« Reply #3 on: Jul 28th, 2013, 9:33am » |
Quote Modify
|
Any car up to 2001 (I think) doesn't need an 'approved-cat' because up to that date the emissions aren't that critically tested. I put the cheapest replacement cat I could on my 2.3 very recently costing £75. It passed the MOT no-problems. Watch out for the bracket on the replacement cat being in the wrong place, Dave had to grind the bracket off and re-weld it in the right place. Also wrap a rag soaked in WD40 around the Lambda-Sensor overnight for ease of removal. The only problem I found apart from bracket on the cat was the fact that the square lug that bolts onto the exhaust manifold wasn't in the centre of downpipe! This looked as if it could be restricting the gas flow so I ground all the rough interior edges down to make sure the exhaust gases had no interruption.
|
|
IP Logged |
I love 'Movvy' 1995 Jaguar XJ6 X300 3.2 (Henley) 1995 Jaguar XJ6 X330 4.0 (Dopey) 1957 Jaguar XK140 USA (converted to RHD, and to have fitted Mk10 420G Engine with BW 65 Auto Trans)
|
|
|
Scorpio_Mike
Senior Member
Jeep Grand Cherokee 3.0 V6 & 2.8 Sierra XR4i 4x4
Posts: 2354
|
|
Re: Scorpio ult 1996 93000K
« Reply #4 on: Jul 28th, 2013, 10:58am » |
Quote Modify
|
Anything registered after Jan 1st 2001 MUST have a Type Approved Catalytic Converter : http://www.bmcatalysts.co.uk/type_approval_regulations.php Another reason not to buy anything registered after that date...
|
|
IP Logged |
Star sign is Scorpio ! Sierra XR4i's are great...especially when fitted with 4WD
|
|
|
jls1936
Newbie
I'm a YaBB newbie!
Posts: 47
|
|
Re: Scorpio2.0 ult 1996 93000K
« Reply #5 on: Jul 29th, 2013, 4:51pm » |
Quote Modify
|
Hi All Got my Scorpio back today with MOT. New cat and flexible pipe fitted and replaced cracked exhaust manifold with one I got from a forum member. Labour cost £192.00 Total cost incl MoT's and vat £570.00 Regards jls1936
|
|
IP Logged |
|
|
|
|