Author |
Topic: ABS LIGHT (Read 1091 times) |
|
scorpioaaron
Full Member
Posts: 126
|
does anyone know why my abs light is on. it only comes on when you pull off any ideas....
|
|
IP Logged |
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: ABS LIGHT
« Reply #1 on: Jul 31st, 2016, 3:44pm » |
Quote Modify
|
It sounds like a loose connection. The unit carries out a self test on the sensors BUT it can stay on until you reach 8-10mph as we think that is about the speed that the motor would cut in to assist with braking. There are many minor issues which can cause such problems. Dirt on the sensors, wiring issues or the famous Dry solder problem which is documented elsewhere. Here You might also like to read through this article and others listed on the left hand side 'buttons'. Here
|
|
IP Logged |
Now I'm an OAP
|
|
|
scorpioaaron
Full Member
Posts: 126
|
|
Re: ABS LIGHT
« Reply #2 on: Aug 2nd, 2016, 6:36pm » |
Quote Modify
|
Brilliant. Thanks for your help👍
|
|
IP Logged |
|
|
|
tve
Junior Member
Independent service
Posts: 88
|
|
Re: ABS LIGHT
« Reply #3 on: Aug 22nd, 2016, 6:13am » |
Quote Modify
|
Opened ABC controller, propyl contacts of the connector. Works now good. Was the fault C1145; C1234. Brazing pin 3 is bad.
|
|
IP Logged |
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: ABS LIGHT
« Reply #4 on: Aug 22nd, 2016, 7:49am » |
Quote Modify
|
Good to know you have fixed it.
|
|
IP Logged |
Now I'm an OAP
|
|
|
pipino
Junior Member
DO IT RIGHT
Posts: 84
|
|
Re: ABS LIGHT
« Reply #5 on: Jan 20th, 2017, 6:10am » |
Quote Modify
|
pls my abs light came up and after checking the all the wheel sensor I discovered the faulty sensor and after changing the light is still on what do I do to clear the abs light on dashboard
|
|
IP Logged |
pinotech
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: ABS LIGHT
« Reply #6 on: Jan 20th, 2017, 9:23am » |
Quote Modify
|
Try disconnecting the battery for a while. Have you driven the car since changing the sensor? Once you drive it above 10mph it should go out if you have found and cured the fault.
|
|
IP Logged |
Now I'm an OAP
|
|
|
|