Author |
Topic: Program mode (Read 2830 times) |
|
pipino
Junior Member
DO IT RIGHT
 
 
Posts: 84
|
 |
Program mode
« on: Jan 18th, 2017, 3:49am » |
 Quote  Modify
|
My 2.3 Scorpio car won't enter program mode when I turn the ignition key on and off three times.
|
|
 IP Logged |
pinotech
|
|
|
a900one
Full Member
A scorpio is for life not just for christmas
Posts: 980
|
|
Re: PROGRAM MODE
« Reply #1 on: Jan 18th, 2017, 9:47am » |
Quote Modify
|
Is this for the key fobs.
|
|
IP Logged |
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: Program mode
« Reply #2 on: Jan 18th, 2017, 9:48am » |
Quote Modify
|
If the car has been left for over 90 hours the radio connection will have shut down to preserve the battery. Start the car and then try again. 
Details are at the bottom of This page
|
|
IP Logged |
Now I'm an OAP
|
|
|
pipino
Junior Member
DO IT RIGHT
Posts: 84
|
|
Re: Program mode
« Reply #3 on: Jan 20th, 2017, 6:04am » |
Quote Modify
|
@Simmo thanks for the advice but that has not solv my problems, the issue is if I want to program for the key fobs and I turn the ignation to l for three time and the forth time its shuld make a beep and go into program mode. it won't go into program mode and the program light on dashboard won't flash pls sir more suggestion
|
|
IP Logged |
pinotech
|
|
|
pipino
Junior Member
DO IT RIGHT
Posts: 84
|
|
Re: Program mode
« Reply #4 on: Jan 20th, 2017, 6:15am » |
Quote Modify
|
is the key fob battery 3V*2 or 3V*1
|
|
IP Logged |
pinotech
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: Program mode
« Reply #5 on: Jan 20th, 2017, 9:20am » |
Quote Modify
|
Two CR2016, 3v.
|
|
IP Logged |
Now I'm an OAP
|
|
|
pipino
Junior Member
DO IT RIGHT
Posts: 84
|
|
Re: Program mode
« Reply #6 on: Feb 5th, 2017, 12:09am » |
Quote Modify
|
Thanks to all my remote is controlling now
|
|
IP Logged |
pinotech
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: Program mode
« Reply #7 on: Feb 5th, 2017, 9:57am » |
Quote Modify
|
Glad to hear you are sorted.
|
|
IP Logged |
Now I'm an OAP
|
|
|
pipino
Junior Member
DO IT RIGHT
Posts: 84
|
|
Re: Program mode
« Reply #8 on: Feb 11th, 2017, 11:16pm » |
Quote Modify
|
Another problem now is that the battery 2016 very fast, I barely use the battery for 2days and it stop working until I change the batteries is this normal?
|
|
IP Logged |
pinotech
|
|
|
pipino
Junior Member
DO IT RIGHT
Posts: 84
|
|
Re: Program mode
« Reply #9 on: Feb 11th, 2017, 11:23pm » |
Quote Modify
|
Whenever I control my auto window from the driver side only the driver side window that goes up and down auto but the other windows goes down auto and goes down manually that is my finger remains on the nub to bring them down
|
|
IP Logged |
pinotech
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: Program mode
« Reply #10 on: Feb 12th, 2017, 9:13am » |
Quote Modify
|
on Feb 11th, 2017, 11:16pm, pipino wrote:| Another problem now is that the battery 2016 very fast, I barely use the battery for 2days and it stop working until I change the batteries is this normal? |
|
No it is not normal. It sounds as if there is a problem with the connections inside the unit.
|
|
IP Logged |
Now I'm an OAP
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: Program mode
« Reply #11 on: Feb 12th, 2017, 9:15am » |
Quote Modify
|
on Feb 11th, 2017, 11:23pm, pipino wrote:| Whenever I control my auto window from the driver side only the driver side window that goes up and down auto but the other windows goes down auto and goes down manually that is my finger remains on the nub to bring them down |
|
The details of window operation are In the Handbook Go to page 61 and then 33 and 34.
|
|
IP Logged |
Now I'm an OAP
|
|
|
pipino
Junior Member
DO IT RIGHT
Posts: 84
|
|
Re: Program mode
« Reply #12 on: May 11th, 2017, 12:56pm » |
Quote Modify
|
A big thanks to the members in this forum because my ford car is coming back to normal my remote works well now but the question now is online other brand of cars no light comes on or flashes when I operate my remote and when I press the lock button twice no sound or beep to indicate it's active but the doors lock
|
|
IP Logged |
pinotech
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: Program mode
« Reply #13 on: May 11th, 2017, 2:31pm » |
Quote Modify
|
One press, the doors lock, the only indication should be flashing dash light.
Two presses you hear the door locks twice, the indicators should flash after a second or so. The doors will be double locked.
To test double locking leave a window open, reach in and try to open, the alarm will go off but you shouldn't be able to open the door. Unlock with the key to turn off the alarm.
If the indicators didn't flash, there may be a fault such as the bonnet switch.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
pipino
Junior Member
DO IT RIGHT
Posts: 84
|
|
Re: Program mode
« Reply #14 on: May 11th, 2017, 3:21pm » |
Quote Modify
|
When u said indicator flashing does that men the directional light or the dash light sir. My double lock and I can't open from inside but the alarm doesn't come on I have never had any sound from the horn that is behind the battery doss that mean it's faulty sir
|
|
IP Logged |
pinotech
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: Program mode
« Reply #15 on: May 12th, 2017, 2:29am » |
Quote Modify
|
Direction indicators should flash when double locked.
The alarm should sound if you've locked the car with the key or fob & try to open a door from inside by reaching through the window. Try one of the other doors. I assume the sounder behind the battery is connected - people sometimes disconnect them if they keep going off.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
pipino
Junior Member
DO IT RIGHT
Posts: 84
|
|
Re: Program mode
« Reply #16 on: May 13th, 2017, 12:33am » |
Quote Modify
|
Pls. sir how do I test for the bonet switch
|
|
IP Logged |
pinotech
|
|
|
pipino
Junior Member
DO IT RIGHT
Posts: 84
|
|
Re: Program mode
« Reply #17 on: May 13th, 2017, 12:56am » |
Quote Modify
|
and is there anyway to test or reset because my doesn't flash
|
|
IP Logged |
pinotech
|
|
|
Glyn
Full Member
Now an OAP ! 95 cossie and another !and a 12v
Posts: 584
|
|
Re: Program mode
« Reply #18 on: May 13th, 2017, 1:03am » |
Quote Modify
|
I have 3 cars ,only one of them flashes the indicators when double locking.
I have to listen for the door lock motors or watch for the alarm light (not easy in sunlight) or look at the door handles inside and watch them move.
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: Program mode
« Reply #19 on: May 13th, 2017, 3:06am » |
Quote Modify
|
I think any fault will prevent the indicators flashing.
With the bonnet down the bonnet switch earths the wire from the Central control module.
If you have an estate a fault with the glass breakage sensors fitted to the 3 rear glass panels will prevent the indicators flashing.
A cheap ELM327 scanner with free Forscan software can read the codes. It's normal to have some boot lock codes, if they're the only codes you'll need to clear them & see if they come back after locking & unlocking.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print