Author |
Topic: MS3X wiring to Scorpio multi plug. (Read 401 times) |
|
Ghia15
Newbie
I'm a YaBB newbie!
Posts: 42
|
 |
MS3X wiring to Scorpio multi plug.
« on: Mar 29th, 2019, 11:22am » |
 Quote  Modify
|
Hi, been a while since I have been on here.
I was just wondering if anyone on here can help me?
I am trying to wire in my BOB to my Capri using megasquirt MS3X.
I was just wondering where the power for the different components comes from such as idle control valve and injectors.
I am wiring into the bulkhead C110 connector but not sure where the power comes from as all I can see from the sheet is the switched earth for the ECU.
Any help is much appreciated.
|
|
 IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: MS3X wiring to Scorpio multi plug.
« Reply #1 on: Mar 29th, 2019, 4:13pm » |
Quote Modify
|
I've had no dealings with the 24v. The PDF diagram show injectors & idle control power spliced together from the same pin all violet as the main colour - but doesn't give the pin number.
On the 2.3 it's violet/blue to pin 38 of C110 so possibly the same, it's a 1.5 wire through C110 up to the splice so should stand out from the .75 wires in C110.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print