Author |
Topic: Things To Keep When Breaking Scorp (Read 3159 times) |
|
Matt
Senior Member
Manual'd and a 4.0 in the making
 
Posts: 2816
|
 |
Things To Keep When Breaking Scorp
« on: Jun 6th, 2011, 8:43pm » |
|
Hey all
A few People have asked what to keep hold of when breaking a scorpio.
Ive broke a few and think this may give Ideas of what to Keep hold of if you have the space or ability to remove them
Rear Shocks (Saloon and Estate)
Rear Drive Shafts
Diff's (even broken ones)
Prop shafts from manual cars (for conversion/transplant people)
Front Wishbones
Front Struts
Brake Capilers Front and Rear
Rear Hubs
Lights, Front and Rear
Engines & gear boxes (if Possible to Remove/keep)
If not possible to keep engines/Box's keep :
Water Hoses
EDIS units
Coil Packs
Idle Valves
Intake Manifolds (2.0 and 2.3)
Thermostat (24v)
A/C pumps
Alternators
Power steering Pump
ABS Units
Master Cylinder
Both Fuse Boxes
Vss units
Sunroof Motors
Sunroof Units
Bumpers
Wing Mirrors
Interior mirror (keep the glass mount if its the self dimming)
Ariel and base unit
Radio units
All Switches and knobs
Removable body panels if poss (doors, bonnet, boot etc)
If not above then glass and window motors
All modules
PATS Unit with ECU, Keys Ignition Transponder and the wiring from the transponder to pats unit, also cut off about a foot of the ECU plug and loom
Spare wheels/Jack sets
Boot carpets (make superb work/kneeling mats lol)
Clutch/Brake Pedal box with clutch master cylinder
Seats
HBC
CD Changer and loom
Clock
Wood trim (although ive never sold one yet)
Alloy Wheels
Ran out of time at the mo so will add more later lol
Feel Free to add 
|
|
 IP Logged |
 
FDS2000 Scans - Birmingham
|
|
|
Scorpio_Mike
Senior Member
Jeep Grand Cherokee 3.0 V6 & 2.8 Sierra XR4i 4x4
Posts: 2354
|
|
Re: Things To Keep When Breaking Scorp
« Reply #1 on: Jun 6th, 2011, 9:18pm » |
|
Front wings worth saving if in good condition - don't think they are available from Ford any more and pattern ones also difficult to find.
|
|
IP Logged |
Star sign is Scorpio !
Sierra XR4i's are great...especially when fitted with 4WD 
|
|
|
Stixy
Full Member
I should know better
Posts: 414
|
|
Re: Things To Keep When Breaking Scorp
« Reply #2 on: Jun 6th, 2011, 11:38pm » |
|
Matt would it be easyier to make a list of bits to thow away
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Things To Keep When Breaking Scorp
« Reply #3 on: Jun 6th, 2011, 11:39pm » |
|
on Jun 6th, 2011, 11:38pm, Stixy wrote:| Matt would it be easyier to make a list of bits to thow away |
|
i think all he throws away is the shell
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
Stixy
Full Member
I should know better
Posts: 414
|
|
Re: Things To Keep When Breaking Scorp
« Reply #4 on: Jun 6th, 2011, 11:42pm » |
|
on Jun 6th, 2011, 11:39pm, Highlander wrote:
i think all he throws away is the shell |
|
And has second thoughts just as it goes ? 
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Things To Keep When Breaking Scorp
« Reply #5 on: Jun 6th, 2011, 11:44pm » |
|
Engine looms
Especially 16v and 24v
High level braking light and the plastic rear window surround if its an estate.
Front hubs with ABS sensor (new sensors are around £100 each I believe)
24v Camshafts and sprockets (good power upgrade for the BOA Granada engine makes them worth a bit)
24v waterpump now obsolete from Ford or if they can find one about £150!!
Fuel rails/injectors/fuel pressure regulator
16v exhaust manifolds (prone to cracking)
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:| I give up ! Too much for an old boy! |
|
|
|
|
Scorpio
Full Member
Posts: 562
|
|
Re: Things To Keep When Breaking Scorp
« Reply #6 on: Jun 7th, 2011, 1:31am » |
|
I keep both cats and O2 sensors on 24v.Worth more to me than scrap value.
|
|
IP Logged |
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: Things To Keep When Breaking Scorp
« Reply #7 on: Jun 7th, 2011, 7:47am » |
|
Yep when they leave me they aint much more then a shell that has to be dragged away,
No point wasting good parts, and ive sold most of the bits i take off
|
|
IP Logged |
FDS2000 Scans - Birmingham
|
|
|
|
Home
Help
Search
Members
Login
Send Topic
Print