Author |
Topic: Breaking, '97 2.3 Ultima (Read 3115 times) |
|
pinxtonpete
Newbie
I'm a YaBB newbie!
    
 
Posts: 24
|
 |
Breaking, '97 2.3 Ultima
« on: Apr 29th, 2006, 11:55am » |
|
Hi folks, after yet another expensive payout on my car to find I had another problem with the bottom end I have decided to break her. All parts are available except the front bumper. She has a single point gas conversion too. Front wishbones and bushes less than 4k from new, unmarked leather, all electrics working.
Call me on 07903230693 for info or of course.. on here 
|
|
 IP Logged |
Cooking on gas ....
|
|
|
Jim
Full Member
1996 2.3 115k and rising
Posts: 121
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #1 on: Apr 29th, 2006, 12:17pm » |
|
Is the short A/C line that runs between the condenser and the accumulator/dehydrator in front of the radiators available. 2.3 engine, auto gearbox.
Operation 34 643 0 in aircon handbook
http://www.fordscorpio.co.uk/manual/aircon/refriglineacc2rcond.pdf
|
|
IP Logged |
Jim
|
|
|
Baz
Moderator
Senior Member
S Reg. 1998 24v Cosworth S2.9 COS (Deceased)
Posts: 4009
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #2 on: Apr 29th, 2006, 12:33pm » |
|
Looking for the all important rear mudflaps!!!
Thanks
Baz
|
|
IP Logged |
|
|
|
bizzay1
Full Member
1997 Cosworth Saloon
Posts: 481
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #3 on: Apr 29th, 2006, 3:31pm » |
|
Inlet Manifold plz !!! 
|
|
IP Logged |
|
|
|
pinxtonpete
Newbie
I'm a YaBB newbie!
Posts: 24
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #4 on: Apr 29th, 2006, 5:31pm » |
|
hi, I have all parts so far, i will get photos and send them to you later, sorry Bizzay but the manifold is the one you saw on Ebay, ends tonight, quite a few watching it at the moment but could be a good buy if noone bids, cost me a fortune 
|
|
IP Logged |
Cooking on gas ....
|
|
|
Baz
Moderator
Senior Member
S Reg. 1998 24v Cosworth S2.9 COS (Deceased)
Posts: 4009
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #5 on: Apr 29th, 2006, 5:45pm » |
|
so you have the rear mudflaps pete?
Baz
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #6 on: Apr 29th, 2006, 6:22pm » |
|
hi barry
fordpartsuk.com are selling a set of 4 for about £50 if that's any good. 
hth
|
|
IP Logged |
|
|
|
bizzay1
Full Member
1997 Cosworth Saloon
Posts: 481
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #7 on: Apr 29th, 2006, 6:25pm » |
|
I have a bid going on with a sniper at the last min don't know if it will be enough though
Thought this might have been another option, cheers
|
|
IP Logged |
|
|
|
Baz
Moderator
Senior Member
S Reg. 1998 24v Cosworth S2.9 COS (Deceased)
Posts: 4009
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #8 on: Apr 29th, 2006, 7:14pm » |
|
Thanks Andrew, but I have the fronts....
|
|
IP Logged |
|
|
|
stafford
Full Member
Ultima lover!!
Posts: 471
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #9 on: Apr 30th, 2006, 9:44am » |
|
do you have the locking key for the alloy wheel centre plates..urgently needed...
|
|
IP Logged |
|
|
|
pinxtonpete
Newbie
I'm a YaBB newbie!
Posts: 24
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #10 on: Apr 30th, 2006, 11:15am » |
|
I have 2 of the keys but aren't the keys different on all the cars for security? I'm not sure, maybe someone else knows the answer,
|
|
IP Logged |
Cooking on gas ....
|
|
|
tintin
Full Member
I'm a YaBB newbie!
Posts: 592
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #11 on: Apr 30th, 2006, 1:54pm » |
|
is the cd changer available?
|
|
IP Logged |
'95 Cosworth Ultima
|
|
|
stafford
Full Member
Ultima lover!!
Posts: 471
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #12 on: Apr 30th, 2006, 3:58pm » |
|
ok I will ask Ford on tues
|
|
IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #13 on: Apr 30th, 2006, 4:11pm » |
|
The cover plates on the alloy wheels all take the same standard three pin key to remove them .... THE wheel nuts however are different I think there are 26 differnt ones
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
mazzy_j
Full Member
Posts: 664
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #14 on: Apr 30th, 2006, 4:34pm » |
|
Do you still have the rear callipers at all?
Thanks, Matt
|
|
IP Logged |
|
|
|
pinxtonpete
Newbie
I'm a YaBB newbie!
Posts: 24
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #15 on: Apr 30th, 2006, 6:27pm » |
|
hi tintin, yes, i have the multichanger, fully working, i have the estate so if you have the saloon you will need the other brackets,
Mazzy, yes, i have the rear calipers, again, fully functioning
PMs sent
|
|
IP Logged |
Cooking on gas ....
|
|
|
purple-rocket
Newbie
I'm a YaBB newbie!
Posts: 35
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #16 on: Apr 30th, 2006, 7:00pm » |
|
have you got the battery cover by any chance, also after another remote fob
cheers Paul
|
|
IP Logged |
|
|
|
johne
Newbie
I'm a YaBB newbie!
Posts: 9
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #17 on: Apr 30th, 2006, 9:31pm » |
|
hi all. im looking for a rear bumber
|
|
IP Logged |
|
|
|
pinxtonpete
Newbie
I'm a YaBB newbie!
Posts: 24
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #18 on: May 1st, 2006, 12:10pm » |
|
Got the rear bumper and battery tray, pms sent
|
|
IP Logged |
Cooking on gas ....
|
|
|
Kenboy
Full Member
I'm a YaBB newbie!
Posts: 703
|
|
Re: Breaking, '97 2.3 Ultima
« Reply #19 on: May 1st, 2006, 6:53pm » |
|
Hi I am looking for an HBC?.
Kenboy
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Send Topic
Print