Author |
Topic: Some bits & bobs. (Read 1025 times) |
|
howiedintheplace
Senior Member
Based near Evesham
Posts: 1194
|
|
Some bits & bobs.
« on: Jul 30th, 2006, 8:42am » |
Quote Modify
|
O.k for sale A 24V BOB engine. Has had timming gear took off checked & refitted. (2 guides replaced) Oil ways have been flushed & main + big ends checked for wear which are O.K. Compression tested. Done 95,000 but is good as it's been checked over. It has no loom, coil or Inlet but the rest is there. £250 A decent rear hub for a Scorpio if your bearing has chewed it up. £10 A pair of brand new BOB exhaust manifolds. £30 24V Steering rack (RHD) £15 A pair of CATS, one after market & both seem good. £20 24V early Diff £15 Saloon rear bumper. Green but has some stratches. £30 Also has cut outs for the STD Ford reversing sensors. Std reversing sensor system complete. £10 + lots of other bits.
|
|
IP Logged |
Dave
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: Some bits & bobs.
« Reply #1 on: Jul 30th, 2006, 11:37am » |
Quote Modify
|
hi dave pm'd you about the reversing sensors. cheers btw, do you have the seat memory switch (buttons 1,2,3 & long one).
|
|
IP Logged |
|
|
|
howiedintheplace
Senior Member
Based near Evesham
Posts: 1194
|
|
Re: Some bits & bobs.
« Reply #2 on: Jul 30th, 2006, 8:20pm » |
Quote Modify
|
on Jul 30th, 2006, 11:37am, scorpio_man wrote:hi dave pm'd you about the reversing sensors. cheers btw, do you have the seat memory switch (buttons 1,2,3 & long one). |
| Sorry just replied to someone via email. So they have the sensor system if they want it but I have the seat module. £5 including post. The reverse sensor system was the full STD fit kit.
|
|
IP Logged |
Dave
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: Some bits & bobs.
« Reply #3 on: Jul 30th, 2006, 9:08pm » |
Quote Modify
|
hi dave pm with contact/payment details for the module. must have been too slow of the mark for the reversing sensors. regards
|
|
IP Logged |
|
|
|
|