Author |
Topic: breaking 2.9 12v (Read 2350 times) |
|
ricky
Full Member
I'm a YaBB newbie!
 
Posts: 165
|
 |
breaking 2.9 12v
« on: Apr 14th, 2007, 9:21am » |
 Quote  Modify
|
hi im breaking my 2.9 12v green ultma estate , most bits aviable and all in very good condition, except passenger side doors and bumpers, tan cloth int 7000,radio any parts req let me know regards rich ps in essex
|
|
 IP Logged |
"Two tonnes of electronic infested metal"...
|
|
|
wayne
Full Member
2l 16v Ultima
Posts: 106
|
|
Re: breaking 2.9 12v
« Reply #1 on: Apr 14th, 2007, 4:02pm » |
Quote Modify
|
Hi Rich.,
Is the interior mirror in good condition?
Would be nice to have one I could see out of... 
|
|
IP Logged |
|
|
|
wayne
Full Member
2l 16v Ultima
Posts: 106
|
|
Re: breaking 2.9 12v
« Reply #2 on: Apr 14th, 2007, 10:11pm » |
Quote Modify
|
Just discovered I've lost my rear offside mudflap 
Would the estate version fit a saloon I wonder? Any chance yours is available?
Cheers, Wayne.
|
|
IP Logged |
|
|
|
wayne
Full Member
2l 16v Ultima
Posts: 106
|
|
Re: breaking 2.9 12v
« Reply #3 on: Apr 14th, 2007, 10:35pm » |
Quote Modify
|
Scratch that last request -- Just been informed the estates are different 
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: breaking 2.9 12v
« Reply #4 on: Apr 14th, 2007, 11:51pm » |
Quote Modify
|
Hi
Do you have a good front passenger & drivers door aperture seal?
That's the seal that goes around the door aperture that the door seals to, it has a bit of pumice trim moulded to it.
Dave
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
ricky
Full Member
I'm a YaBB newbie!
Posts: 165
|
|
Re: breaking 2.9 12v
« Reply #5 on: Apr 15th, 2007, 7:09am » |
Quote Modify
|
yep got thempm sent ta
|
|
IP Logged |
"Two tonnes of electronic infested metal"...
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: breaking 2.9 12v
« Reply #6 on: Apr 15th, 2007, 4:27pm » |
Quote Modify
|
on Apr 15th, 2007, 7:09am, ricky wrote:
Hi Rick
Thanks pm sent
Dave
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
josswallace
Full Member
I love YaBB 1G - SP1!
Posts: 149
|
|
Re: breaking 2.9 12v
« Reply #7 on: Apr 16th, 2007, 10:54am » |
Quote Modify
|
What was the registration date of your motor. I am having terrible difficulty with a faulty arcon dashbord module and SATc unit.
.
|
|
IP Logged |
|
|
|
ricky
Full Member
I'm a YaBB newbie!
Posts: 165
|
|
Re: breaking 2.9 12v
« Reply #8 on: Apr 16th, 2007, 5:55pm » |
Quote Modify
|
hi its 96 on an n plate regards rick
|
|
IP Logged |
"Two tonnes of electronic infested metal"...
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: breaking 2.9 12v
« Reply #9 on: Apr 17th, 2007, 3:58pm » |
Quote Modify
|
Rick
Thanks for dropping off the seals, sorry I wasn’t back in time to meet you.
Both fitted now – should be a lot quieter with some decent ones on.
Dave
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
josswallace
Full Member
I love YaBB 1G - SP1!
Posts: 149
|
|
Re: breaking 2.9 12v
« Reply #10 on: Apr 17th, 2007, 7:45pm » |
Quote Modify
|
Rick
Do you have the air con dash booard control unit and the SATC (temperature control) unit, and was it all working OK including the re-set procedure.
IF so I would beinterested if you could let me have a price.
Thanks........Ian Wallace (ian@josswallace.co.uk)
|
|
IP Logged |
|
|
|
ricky
Full Member
I'm a YaBB newbie!
Posts: 165
|
|
Re: breaking 2.9 12v
« Reply #11 on: Apr 18th, 2007, 4:44pm » |
Quote Modify
|
hi yes i have all the air con bits and they are all in perfect order never did a reset never needed to as for the price i dont have any idea what they go for do you ? regards rick
|
|
IP Logged |
"Two tonnes of electronic infested metal"...
|
|
|
ricky
Full Member
I'm a YaBB newbie!
Posts: 165
|
|
Re: breaking 2.9 12v
« Reply #12 on: Apr 22nd, 2007, 5:24pm » |
Quote Modify
|
headlights, rear lights, modules, ect all still aviable at very good prices, loads of bits
|
|
IP Logged |
"Two tonnes of electronic infested metal"...
|
|
|
bridgdav
Newbie
Newbie to the Scorpio world..! 1995 24V Cos Ultima
Posts: 28
|
|
Re: breaking 2.9 12v
« Reply #13 on: May 10th, 2007, 4:11pm » |
Quote Modify
|
Rear Shocks..? Self levelling..?
|
|
IP Logged |
|
|
|
adowds
Full Member
Scorpio Rising
Posts: 259
|
|
Re: breaking 2.9 12v
« Reply #14 on: May 10th, 2007, 6:04pm » |
Quote Modify
|
I think the_boogeyman has some shocks. Check his posts?
EDIT looks like they've gone now actually.
|
|
IP Logged |
|
|
|
smudgefood
Newbie
I'm a YaBB newbie!
Posts: 14
|
|
Re: breaking 2.9 12v
« Reply #15 on: May 10th, 2007, 10:19pm » |
Quote Modify
|
Hi
I look for a drivers side headlight for a 1998 Scorpio estate can you help
|
|
IP Logged |
|
|
|
victim
Newbie
I'm a YaBB newbie!
Posts: 6
|
|
Re: breaking 2.9 12v
« Reply #16 on: May 14th, 2007, 8:18am » |
Quote Modify
|
I am after the powersteering pump and pipe (that goes between the pump and rack). Also may be interested in the lower timing chain sprocket and spacer washer and CPS and bracket and possibly the powersteering pump bracket itself.
I'm assuming it uses the later powersteering pump design for the engine with the rectangular remote reservoir.. that reminds me I'm also interested in the pressed steel bracket that the reservoir mounts with.
|
|
IP Logged |
|
|
|
michellereece
Newbie
I'm a YaBB newbie!
Posts: 36
|
|
Re: breaking 2.9 12v
« Reply #17 on: Jun 1st, 2007, 5:15pm » |
Quote Modify
|
will the ecu be the same as the gear if so how much for ecu and map sensor thanks 
|
|
IP Logged |
|
|
|
Swarfmaker
Newbie
I'm a YaBB newbie!
Posts: 27
|
|
Re: breaking 2.9 12v
« Reply #18 on: Jun 3rd, 2007, 5:30pm » |
Quote Modify
|
I'd be interested in a headunit to CD Multichanger lead if it could be stripped out of the loom.
Regards
Iain
|
|
IP Logged |
|
|
|
ricky
Full Member
I'm a YaBB newbie!
Posts: 165
|
|
Re: breaking 2.9 12v
« Reply #19 on: Jun 4th, 2007, 4:10pm » |
Quote Modify
|
sorry mate but its gone
|
|
IP Logged |
"Two tonnes of electronic infested metal"...
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print